ADTRAN 3430 Enable Telnet Access, Configure Your Application, Console Pinouts, Ethernet Pinouts

Page 2

®

Quick Start Guide

 

For more detailed documentation, visit us online at www.adtran.com.

NetVanta 3430 Router

P/N 1200820E1

 

 

WAN-T1DBU

SLOT 1 NET / DBU

ETH 0/1

CONSOLE

ETH 0/2

NETVANTA 3430 REAR PANEL LAYOUT

ENABLE TELNET ACCESS

The following steps create a password of adtran for Telnet access. By default, Telnet access is enabled with a password of password.

1.Verify that the prompt of your unit displays (config)#.

2.Enter line telnet 0 4 to change the configuration parameters for the Telnet sessions.

3.Enter login to initiate Telnet access.

4.Enter password adtran to change the login password for the Telnet sessions.

5.Enter exit to return to the Global Configuration mode.

6.Verify that the prompt of your unit displays (config)#.

7.Enter do write memory to save the current configuration.

CONFIGURE YOUR APPLICATION

More detailed documentation for configuring your ADTRAN unit is provided on the ADTRAN OS System Documentation CD included in your shipment. For more detail on hardware setup, refer to the appropriate NIM Quick Start Guides and the Hardware Installation Guide. For more detail on configuring your system, refer to the ADTRAN Operating System (AOS) Command Reference Guide, configuration guides, and technical support notes.

Important: For additional details on product features, specifications, installation, and safety, refer to the appropriate Hardware Installation Guide on the ADTRAN OS System Documentation CD shipped with the base unit and available online at www.adtran.com.

CONSOLE PINOUTS

Pin

Name

Description

 

 

 

1

DCD

Data Carrier Detect (output)

2

RD

Receive Data (output)

3

TD

Transmit Data (input)

4

DTR

Data Terminal Ready (input)

5

SG

Signal Ground

6

Tied to Pin 1 (output)

7

Unused

8

Tied to Pin 1 (output)

9

Unused

ETHERNET PINOUTS

Pin

Name

Description

 

 

 

1

TX1

Transmit Positive

2

TX2

Transmit Negative

3

RX1

Receive Positive

4, 5

Unused

6

RX2

Receive Negative

7, 8

Unused

Quick Start Guide, 61200820E1-13A, July 2006

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Copyright © 2006 ADTRAN, All Rights Reserved

Image 2
Contents Configure the UNIT’S IP Address Access the GUIAccess the CLI Getting StartedConsole Pinouts Enable Telnet AccessConfigure Your Application Ethernet Pinouts