ADTRAN 3205, 3200 manual Application Drawings Routing across the WAN Revision C

Page 17

4. Press the “Apply” button.

Note: If you choose to change the IP address of Ethernet 0/1, you will need to change the IP address of your workstation to an IP on the same network as Ethernet 0/1 to continue configuring the router.

5. Choose "Physical Interfaces" from the left hand side menu options.

6. Choose "t1 1/1" from the list of physical interfaces displayed.

Application Drawings: Routing across the WAN
Revision C	Page 17 of 27

Image 17

Contents Application Drawings Overview Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Checked the box next to Enable Next to Clocking choose Internal Application Drawings Routing across the WAN Revision C Choose PPP next to Encapsulation Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Configuration Script for the NetVanta 3200/3205 Ho st Router Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Check the box next to Enable, to enable the interface Application Drawings Routing across the WAN Revision C Choose PPP from the Encapsulation options Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Revision C Application Drawings Routing across the WAN Application Drawings Routing across the WAN Revision C