ADTRAN 1203870G1, 3448, 1202872L1, 1200821E1, 1202820G1 manual Installing the Octal PoE Upgrade Module

Page 81

NetVanta 3200/3300/3400 Series

Unit Installation

 

 

Installing the Octal PoE Upgrade Module

The NetVanta Octal PoE Upgrade provides the ability to detect attached PDs and deliver 48 VDC to the PDs via existing CAT 5 cabling. If your NetVanta 3448 or NetVanta 3458 did not originally come with PoE capability, it can be upgraded using the Octal PoE Upgrade. The Octal PoE Upgrade is shipped with the Octal PoE module, two standoffs, the Octal PoE power supply, and appropriate power cords.

 

 

Instructions for Installing the Octal PoE Upgrade Module

 

 

 

Step

 

Action

 

 

 

1

 

Remove power from the unit.

 

 

 

2

 

Remove the three screws from the unit, the two jack screws from the back panel, and, if necessary, the two

 

 

mounting brackets (see Figure 43 on page 82).

 

 

 

3

 

Carefully lift and remove the unit’s cover to expose the circuit board.

 

 

 

4

 

Remove the two PC board mounting screws (do not discard).

 

 

 

5

 

Thread and secure the two standoffs (supplied with the NetVanta Octal PoE module) into the two holes from

 

 

which you removed the PC board mounting screws.

 

 

 

6

 

Carefully align the 34-pin receptacle on the Octal PoE module with the 34-pin header located on the circuit

 

 

board. Applying even pressure, press the module until it is well seated.

 

 

 

7

 

Align the holes in the standoffs with the holes in the Octal PoE module. Attach the module to the standoffs

 

 

using the two previously removed PC board mounting screws.

 

 

 

8

 

Replace the unit cover, screws, and mounting brackets.

 

 

 

9

 

Restore power to the unit following the instructions in Powering the NetVanta with Octal PoE Upgrade on

 

 

page 70.

 

 

 

 

 

 

 

 

Electronic modules can be damaged by static electrical discharge. Before handling

 

 

modules, wear an antistatic discharge wrist strap to prevent damage to electrical

 

 

components. Place modules in antistatic packing material when transporting or storing.

 

 

 

When working on modules, always place them on an approved antistatic mat that is

 

 

electrically grounded.

 

 

 

 

 

 

 

 

The NetVanta Octal PoE Upgrade Module is intended to be installed only by qualified

 

 

service personnel.

 

 

 

 

 

61200860L1-34AB

Copyright © 2012 ADTRAN, Inc.

81

Page 80 Page 82
Image 81
Page 80 Page 82
Contents 61200860L1-34AB October Trademarks To the Holder of the ManualSoftware Licensing Agreement Conventions Save These Important Safety Instructions Safety InstructionsREN/SOC FIC Usoc FCC-Required InformationNetVanta Module P/N and Name Toll Fraud Liability Service and WarrantyService and Warranty NetVanta 3200/3300/3400 Series Table of Contents Appendix A. Connector Pin Definitions List of Figures List of Figures NetVanta 3200/3300/3400 Series List of Tables List of Tables NetVanta 3200/3300/3400 Series Introduction NetVanta NetVanta 3200 Features and SpecificationsNetVanta 3200 Shipping Contents NetVanta 3200 Front Panel Design NetVanta 3200 Rear Panel DesignCSMA/CD NetVanta 3205 Features and Specifications NetVanta 3205 Shipping Contents NetVanta 3205 Rear Panel Design NetVanta 3205 Front Panel DesignNetVanta 3305 Features and Specifications USB Wwan NetVanta 3305 Shipping Contents NetVanta 3305 Front Panel DesignNetVanta 3305 Rear Panel Design NetVanta 3305 Rear Panel Interfaces and LEDs NetVanta 3430 Features and SpecificationsPhysical Descriptions NetVanta 3200/3300/3400 Series NetVanta 3430 Shipping Contents NetVanta 3430 Rear Panel Design NetVanta 3430 Front Panel DesignNetVanta 3448 Features and Specifications NetVanta 3448 Shipping Contents NetVanta 3448 Front Panel Layout NetVanta 3448 Front Panel DesignSwitch Port Interfaces NetVanta 3448 Rear Panel DesignPoE NetVanta 3450 Features and Specifications NetVanta 3450 Shipping Contents NetVanta 3450 Rear Panel Design NetVanta 3450 Front Panel DesignNetVanta 3458 Features and Specifications NetVanta 3458 Shipping Contents NetVanta 3458 Front Panel Layout NetVanta 3458 Front Panel DesignNetVanta 3458 Rear Panel Design NetVanta 3000 Series Front Panel LEDs NetVanta 3000 Series Front Panel LEDsColor Indication Option Modules Option Module Shipping Contents NetVanta Shdsl NIM, Annex a 1200936E1 NetVanta Serial NIM 1200866E1NetVanta Shdsl NIM, Annex B 1200937E1 NetVanta Adsl NIM, Annex a 1202869E1NetVanta Isdn S/T DIM 1200875L1 NetVanta 56K/64K NIM P/N 1200861L1 Network Interface ModulesNetVanta T1/FT1 NIM P/N 1202862L1 Operating Modes DiagnosticsPPP, Mlppp HdlcGR-63-CORE NetVanta T1/FT1 Nebs NIM P/N 1200862L2#NEBSNetVanta T1/FT1 + DSX-1 NIM P/N 1202863L1 Operating Modes Clock SourceDSX-1 Interface PPP, Mlppp Hdlc NetVanta Dual T1 NIM P/N 1200872L1/1202872L1Operating Modes T1 InterfaceNetVanta E1/FE1 NIM P/N 1200868E1/L1 AS/ACIF S016WAN-E1 Interface NetVanta E1/FE1 + G.703 NIM P/N 1200878E1/L1 InterfaceClock Source Physical NetVanta Serial NIM P/N 1200866E1 Operating Mode EnvironmentalEtsi TBR1 Etsi TBR2 Serial InterfaceOperating Mode NetVanta Shdsl NIM, Annex a P/N 1200936E1Shdsl Interface NetVanta Shdsl NIM, Annex B NetVanta Shdsl NIM, Annex B P/N 1200937E1AS/ACIF S043 NetVanta Adsl NIM, Annex a P/N 1202869E1AS/ACIF S002 ATM F5 OAMNetVanta Adsl NIM, Annex B NetVanta Adsl NIM, Annex B P/N 1202889E1USB Interface Environmental NetVanta USB Wwan NIM P/N 1702803F1Features Dial Backup Interface ModulesNetVanta Analog Modem DIM P/N 1200864L1 StandardsNetVanta Isdn BRI DIM P/N 1200865L1 Etsi TBR NetVanta Isdn S/T DIM P/N 1200875L1Tools Required Unit InstallationMounting Options Wall Mounting NetVanta 3200/3300/3400 Series Step Action Instructions for Wall Mounting NetVantaDown Wall Mounting the NetVanta 3430/NetVanta Instructions for Wall Mounting NetVanta 3430/NetVantaWall Mounting the NetVanta 3450 and NetVanta Wall Mounting the NetVanta PoE Power SupplyWall Mounting the NetVanta PoE Power Supply Supplying Power to the Unit Powering the NetVantaInstructions for Powering the NetVanta Powering the NetVanta with Octal PoE Upgrade Powering the NetVanta 3205 DC Oror NetVanta 3200/3300/3400 Series Unit Installation Instructions for Installing the DIMs Installing Dial Backup and Network Interface ModulesNIM and DIM Installation Using a USB Cellular Modem with the NetVanta USB Wwan NIM NetVanta VPN Accelerator Card Installation Instructions for Installing the VPN Accelerator CardInstructions for Installing Sodimm Installing Sodimm for Expandable MemorySodimm Installation Keyed Slots Instructions for Installing a CompactFlash Card Installing a CompactFlash CardInstructions for Installing the Octal PoE Upgrade Module Installing the Octal PoE Upgrade ModuleNetVanta Octal PoE Upgrade Installation Table A-1 /100Base-T Ethernet Port Pinouts Name Description Appendix A. Connector PIN DefinitionsTable A-5. Adsl Connector Pinouts Name Description Table A-3. Console Port DCE Pinouts for NetVantaName Description Table A-7. WAN-T1 Connector Pinouts Table A-6. WAN-DDS Connector Pinouts Name DescriptionTable A-8. WAN-E1 Connector Pinouts Pin Name DescriptionTable A-9. DSX-1 Connector Pinouts Name Description Table A-10. G.703 Connector PinoutsTable A-11. WAN-SHDSL Connector Pinouts Name Description Table A-13. USB Wwan Connector Pinouts Table A-12. WAN-ADSL Connector Pinouts Name DescriptionEIA Pin Name Table A-14. Serial to Cable Connector PinoutsTable A-16. Isdn S/T DBU Connector Pinouts Name Description Dial Backup Interface Module Pinouts DBU ConnectorCopyright 2012 ADTRAN, Inc
Related manuals
Manual 2 pages 5.58 Kb

1203860G1, 1202872L1, 1203870G1, 1202880E1, 1202820G1 specifications

The ADTRAN 3448 is a prominent solution in the realm of network connectivity, designed primarily for delivering high-performance broadband services. This device is part of ADTRAN's extensive portfolio aimed at supporting both residential and business applications while leveraging advanced technologies to ensure optimal performance and reliability.

One of the main features of the ADTRAN 3448 is its robust architecture, which supports a multitude of deployment scenarios. It is designed to facilitate a scalable network infrastructure, enabling service providers to cater to a diverse range of customer demands efficiently. With its ability to handle multiple types of services, the ADTRAN 3448 is particularly well-suited for environments that require both voice and data transmission.

The device utilizes cutting-edge technologies, including VDSL2 and G.fast for high-speed broadband delivery. These technologies enable the ADTRAN 3448 to maintain high data rates over existing copper infrastructure, maximizing the utility of legacy cabling without necessitating expensive overhauls. This aspect is especially crucial for rural and underserved areas, where the cost of fiber deployment can be prohibitive.

In terms of characteristics, the ADTRAN 3448 offers high-density service capabilities, with support for a significant number of subscribers per unit. This feature allows for efficient use of physical resources and supports the growing demand for bandwidth driven by streaming services, cloud applications, and the Internet of Things (IoT). Moreover, with integrated support for various broadband protocols, the device can seamlessly switch between different service types, providing flexibility in service offerings.

The ADTRAN 3448 is built with advanced management capabilities, including remote monitoring and diagnostics. This allows service providers to maintain network integrity and rapidly resolve issues without needing to dispatch technicians to the field. Additionally, its modular design ensures that as network demands grow, operators can upgrade components without replacing the entire system.

Security features are also a fundamental aspect of the ADTRAN 3448, addressing the increasing need for secure communications in today's digital landscape. With built-in encryption and secure access controls, the device helps protect sensitive data, ensuring that service providers can meet compliance requirements while delivering reliable services.

In summary, the ADTRAN 3448 stands out as a versatile and powerful tool for network operators looking to enhance their service offerings. Its combination of advanced technologies, high-density capabilities, flexible service support, and robust management features make it an ideal choice for a wide range of applications, fulfilling the increasing demands of modern connectivity.
Top Page Image Contents