Allied Telesis 86222-21 manual PCR Module TRG, Snmp Network affecting No

Page 21

Patch 86222-21 For Rapier Switches and AR800 Series Modular Switching Routers

21

PCR: 01206

Module: ISAKMP

Network affecting: No

A memory loss occurred when certificates were used by ISAKMP. This issue has been resolved.

PCR: 01207

Module: ISAKMP

Network affecting: No

ISAKMP heartbeats are no longer transmitted if the lower layer interface is down. This stops ISAKMP heartbeats from bringing up links in dial-up environments.

PCR: 01209

Module: ISAKMP

Network affecting: No

In some conditions it was possible for ISAKMP packets to be lost and not retransmitted. Incoming ISAKMP messages are now validated before stopping retransmission of the previous message.

PCR: 01211

Module: SWI

Network affecting: No

The COS_DST bit on ARL for L3 interface should be 0x4 (higher priority) for

CPU ports. This has been corrected.

PCR: 01213

Module: TRG, SNMP

Network affecting: No

The Trigger Facility was generating a trap with variable { 0 0 }, and was not documented in the ATI enterprise MIB. This issue has been resolved. The MIB object triggerLastTriggerActivated ({ enterprises(1) alliedTelesyn(207) mibObjects(8) brouterMib(4) atrouter(4) modules(4) trigger(53) 1 }) has been defined, to record the trigger number of the last trigger activated, and this variable is now transmitted in the trigger activation trap triggerTrap.

PCR: 01214

Module: SWI

Network affecting: No

In a Rapier G6, fitted with a fibre uplink module with all ports active, switching traffic between port 1 and the uplink caused the traffic flow to cease after a period of time depending on the volume of traffic. This issue has been resolved.

PCR: 01216

Module: STP

Network affecting: No

The Rapier did not include the message age of the received BDPU message in the message age of the BDPU it transmitted. Also, the message age of the message transmitted BDPU could be less than that of the received BDPU, which contravenes IEEE 802.3d. This issue has been resolved.

PCR: 01219

Module: VLAN,SWI

Network affecting: No

Reception of incorrectly tagged packets was causing corruption of the ARL table, eventually causing the switch to lock up. This issue has been resolved. Tagged packets with invalid VLAN identifiers are now discarded. The INFILTERING parameter of the SET SWITCH PORT command now defaults to ON.

PCR: 01221

Module: SWI

Network affecting: No

Flow control performance has been improved.

 

PCR: 01225

Module: IPSEC

Network affecting: No

The IPsec SA ID now wraps correctly at the 16 bit (ID = 65535) boundary.

The ID is also checked to verify that it is free before it is used.

Patch 86222-21 for Software Release 2.2.2 C613-10319-00 REV T

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Introduction PCR Module Vrrp Network affecting No PCR Module Firewall Network affecting NoPCR Module IPG/FIREWALL Network affecting No PCR 02329 Module Dhcp Network affecting NoPCR 02397 Module Dvmrp Network affecting No PCR Module SWI Network affecting NoPCR Module IPG Network affecting No PCR Module Igmp Network affecting YesPCR 02198 Module Dhcp Network affecting Yes PCR Module CORE, Snmp Network affecting NoLog messages are no longer stored in NVS PCR Module LOG Network affecting NoPCR Module File Network affecting No PCR Module DHCP, IPG Network affecting NoPCR Module DNS Network affecting No PCR Module TTY Network affecting NoPCR Module PIM, DVMRP, SWI Network affecting No PCR Module DUART, TM Network affecting NoFeatures PCR Module STP Network affecting No PCR Module IPG Network affectingNoPCR Module Dhcp Network affecting No PCR Module Load Network affecting No Patch file details for Patch 86222-18 are listed in TablePCR Module OSPF, IPG Network affecting No PCR Module Ospf Network affecting Yes PCR Module FILE, FFS Network affecting NoPCR Module FFS Network affecting No PCR Module TRG Network affecting NoPCR 02099 Module Dhcp Network affecting No Patch file details for Patch 86222-16 are listed in TablePatch file details for Patch 86222-15 are listed in Table PCR 02015 Module Snmp Network affecting NoPCR 02070 Module Core Network affecting No PCR Module Switch Network affecting NoPCR 02035 Module Vlan Network affecting No PCR Module Ping Network affecting NoPCR Module Telnet Network affecting No Patch file details for Patch 86222-13 are listed in TablePatch file details for Patch 86222-12 are listed in Table Has been added to the following commandsPCR 01257 Module Dhcp Network affecting No PCR Module IPG/VRRP Network affecting NoPCR Module Ipgigmp Network affecting No PCR Module Trigger Network affecting No PCR 02007 Module Dhcp Network affecting NoPCR Module IPG, VLAN, SWI Network affecting No Patch file details for Patch 86222-11 are listed in TablePatch file details for Patch 86222-10 are listed in Table Patch file details for Patch 86222-09 are listed in TablePCR Module STP, SWI Network affecting Yes PCR Module SWI, CORE, IPG Network affecting No PCR Module PRI Network affecting NoPatch file details for Patch 86222-08 are listed in Table PCR Module PIM Network affecting No PCR Module L2TP Network affecting YesPCR 01018 Module Dhcp Network affecting No PCR Module IPG,FIREWALL Network affecting NoPCR Module L2TP, IPG Network affecting No PCR Module Http Network affecting NoPCR Module Q931 Network affecting No PCR Module TCP Network affecting NoPCR Module VLAN,SWI Network affecting No PCR Module TRG, Snmp Network affecting NoPatch file details for Patch 86222-06 are listed in Table PCR Module Core Network affecting No Patch file details for Patch 86222-05 are listed in TablePCR Module PKI Network affecting No PCR Module IPv6 Network affecting NoPCR 01187 Module IPGNetwork affecting No PCR 01186 Module FIREWALLNetwork affecting NoPatch file details for Patch 86222-04 are listed in Table PCR Module CORE, SWI Network affecting NoPCR 01165 Module Dhcp Network affecting No PCR 01167 Module Enco Network affecting NoPCR Module ETH, Trigger Network affecting No Patch file details for Patch 86222-01 are listed in Table PCR 01100 Module Dhcp Network affecting NoPKI enrolment no longer causes message validation to fail Availability Patch Release Note

86222-21 specifications

Allied Telesis 86222-21 is a versatile and robust network switch designed for a variety of applications across different industries. This device is engineered to deliver high-performance connectivity, making it an ideal choice for both enterprise environments and smaller businesses looking to enhance their network infrastructure.

One of the standout features of the Allied Telesis 86222-21 is its support for advanced Layer 2 switching capabilities. This allows for efficient data transfer within local area networks (LANs) by enabling the management of data packets based on MAC addresses. The device is equipped with multiple Gigabit Ethernet ports, promoting fast and reliable connections for numerous devices and reducing latency in data transmission.

In a world increasingly dependent on cloud services and virtualization, the 86222-21 is designed to accommodate the growing need for bandwidth. It supports Power over Ethernet (PoE), which simplifies the installation of networked devices like IP cameras and wireless access points by providing power through the Ethernet cable, eliminating the need for separate power supplies. This not only streamlines device management but also enhances flexibility in network design.

Security is a paramount concern for any modern network, and this model addresses those needs with robust built-in security features. The device includes VLAN support, allowing for the segmentation of networks into distinct domains for enhanced data security and management. Access Control Lists (ACLs) further bolster network security by enabling fine-grained control over which devices can communicate with each other.

Allied Telesis 86222-21 also features an intuitive management interface, which is crucial for IT administrators responsible for maintaining network performance. The graphical user interface (GUI) and command line interface (CLI) provide flexibility in managing the switch, allowing for configuration changes and monitoring of network health with ease.

Additionally, this network switch is designed with energy efficiency in mind. It complies with various energy-saving standards, which not only reduces operational costs but also contributes to environmental sustainability.

Overall, the Allied Telesis 86222-21 is a powerful and flexible switch equipped with advanced features that cater to the needs of modern networks. It promotes efficient data management, robust security, and energy efficiency, making it a fitting solution for diverse networking requirements. Whether used in small offices or larger enterprise environments, its adaptability and performance capabilities make it a valuable asset in the pursuit of effective network communication.
Top Page Image Contents