28 | Patch Release Note |
PCR: 01152 | Module: FIREWALL | Network affecting: No |
In a dual policy configuration, the firewall would lock up under load. The firewall would also mistakenly report SYN attacks. These issues have been resolved.
PCR: 01159 | Module: PIM | Network affecting: No |
The CREATE CONFIG command generated duplicate PIM interface configuration command lines. This issue has been resolved.
PCR: 01162 | Module: PKI | Network affecting: No |
Certificates containing GeneralisedTime with the year in YYYY format are now parsed correctly. The keyUsage field of certificates is now parsed correctly when only one byte has been specified. The CRL update time is now displayed correctly in hours. If the username and password parameters are present the location parameter must be present and appear before the username and password parameters.
PCR: 01165 Module: DHCP | Network affecting: No |
The DHCP server now correctly allocates addresses to clients running
Apple Open Transport 2.5.1 or 2.5.2.
PCR: 01166 | Module: FIREWALL | Network affecting: No |
Both public and private access could be configured on the same interface on a policy. This issue has been resolved.
PCR: 01167 Module: ENCO | Network affecting: No |
RSA encryption is now periodically suspended to ensure other processes get some CPU time during large RSA calculations.
PCR: 01169 | Module: ISAKMP | Network affecting: No |
The CREATE ISAKMP command now checks that the key specified by the
LOCALRSAKEY parameter actually exists in the ENCO module.
PCR: 01171 | Module: ETH, TRIGGER | Network affecting: No |
The INTERFACE parameter of the CREATE TRIGGER and SET TRIGGER commands now supports Ethernet interfaces. Ethernet interface events can now generate triggers.
PCR: 01173 | Module: Telnet | Network affecting: No |
The Telnet server’s listen port can now be configured to a number in the range 1 to 65535, excluding any ports already assigned as listen ports.
PCR: 01174 | Module: Firewall | Network affecting: No |
The CREATE CONFIG command sometimes generated scripts for rule commands with GBLIP=0.0.0.0 when this was not necessary. This issue has been resolved.
Patch