Installing the Wireless Bridge Manager Software
If any of these items is missing or damaged, please contact the place of purchase or 3Com Customer Support (http://support.3com.com).
Installing the Wireless Bridge Manager Software
You can install the 3Com Wireless
■One desktop computer, through which you can globally configure and administer all of the wireless bridge units.
■One laptop computer, through which you can adjust antenna polarization during installation by using the RSSI monitor at the antenna site.
1Insert the Installation CD into your computer’s
a Click My Computer.
b Click the icon for the drive in which the Installation CD is located. c
The Welcome screen appears.
2Click Next to continue the installation. The Software License screen appears.
3Click Yes to indicate that you agree with the displayed terms.
The Choose Destination Location screen appears. This screen displays the default path and location for the Bridge Manager files and documents:
c:\program files\3com\3com wireless bridge manager
You can leave the directory set at the default path, or you can change the directory to suit your requirements.
4Enter the directory in which the Bridge Manager program will be installed. When you have finished, click Next to continue.
The Bridge Manager files and documents are installed in the directory you specified. It is possible that the installer will require that you restart your computer to complete the installation. When the installation is complete, a message is displayed that confirms a successful installation.
5Click Finish to exit the installation.
The Bridge Manager is now installed and you are ready to use it to configure your wireless bridge units.
3