3Com 7000 manual Benefits of Isdn

Page 18

1-2 CHAPTER 1: BRIDGE/ROUTER MODULE

Typically, the Bridge/Router module is used to interconnect LANs running protocols such as Transmission Control Protocol/Internet Protocol (TCP/IP) or Novell Internetwork Packet Exchange (IPX). The module offers full LAN-to-LAN connectivity at speeds up to 64 Kilobits per second (Kbps) on each ISDN channel (128 Kbps in total) and up to 2 Megabits per second (Mbps) on the WAN port.

The maximum bandwidth of the Bridge/Router Module is 2 Mbps. If you have a single leased-line link running at 2 Mbps connected to a WAN port, you must disable the ISDN ports and the second WAN port.

In the USA, some ISDN services run over 56 Kbps channels. Basic Rate ISDN therefore offers connectivity of 112 Kbps in total.

Benefits of ISDN

ISDN is an extension of the national and international public switched telephone network, which offers a digital end-to-end telecommunication system, providing a better quality service than available using the analog telephone network. The principal benefits of ISDN are:

Fast call setup times, typically taking less than one second for national calls.

Greater bandwidth with multiple channels.

The basic rate service, often referred to as ISDN 2, carries two 64 Kbps (possibly 56 Kbps in USA) user channels, called B channels and one 16 Kbps control channel called the D channel. The line service is presented into the customers premises through a standard RJ45 socket.

The PRI Bridge/Router module is designed to operate with Primary Rate ISDN services provided to the AccessBuilder 7000 through the PRI Interface Module and supports up to eight 64 Kbps (possibly 56 Kbps in USA) user channels.

A significant aspect of the ISDN service is that it can be provided over the same wiring that was installed for the original telephone service. Therefore, ISDN can be made available relatively cheaply almost anywhere that previously had access to the analog system. The cost of

Image 18
Contents Accessbuilder BRIDGE/ROUTER Module User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Important Safety Information Wichtige Sicherheitshinweise ’INFORMATION DE Sécurité Importante Page Contents Installation and Operation BRIDGE/ROUTER Specification and Cable PIN Assignments Index Limited Warranty FCC Class a Verification Statement About this Guide IntroductionHow to Use This Guide This table shows where to find specific informationConventions Icon conventions that are used throughout this guide areAdditional Safety Information Additional Safety Information About this Guide BRIDGE/ROUTER Module Benefits of Isdn Using Isdn to Support Leased Line WAN Circuits Principal Features Typical Applications Novell NetworkConnecting To a Remote Novell Network IP Host on the Same IP Network 192.100.100.xxxBRIDGE/ROUTER Module IP Host on Another IP Network IP Routed NetworkInternet or PPP Router PPP Connections To The Internet and Corporate NetworkMultiple Connections from a Single Site Multiple Connections From a Single SitePack Contents Checklist Registering Ownership of your Bridge/Router ModulePre-installation Requirements BRIDGE/ROUTER Module Installation and Operation OverviewBRI Bridge/Router Module Installing The ModuleInstallation PRI Bridge/Router ModuleInstalling The Module Installing the Rear Card Installing the Front Card Example Of Installing a Front CardConnecting the Cables ManagerWAN Ports 8 Front Panel LEDs BRI Bridge/RouterTest Lights during the power-on self test PRI Bridge/RouterConfiguring the Bridge/Router Module Monitoring Isdn Line UsageSetting Up a WAN Link Edit WAN Port ScreenInstallation and Operation Troubleshooting Troubleshooting GuideManagement Problems Other LEDs Do Not Light Power LED Does Not LightISDN/CHANNEL LEDs Do Not Light Bridge/Router Does not Connect to the Remote DeviceWAN Connector Interface SpecificationsLAN Connector Interfaces Isdn Connector InterfaceManagement Connector Interface Bridge CharacteristicsPerformance Approvals Physical DescriptionLAN Port Pin Assignments AUI Cable10BaseT Connecting Cable Isdn Port Cable Pin AssignmentsWAN Port Cable Pin Assignments 21/V.1124/V.28 35/V.36 Management Port Cable Pin Assignments Page On-line Technical Services 3Com Bulletin Board ServiceWorld Wide Web Site Call the telephone number nearest youSupport from Your Network Supplier Support from 3Com Returning Products for Repair Appendix B Technical Support Index NumericsSRC Master LED SRC Slave LED Limited Warranty 408 764-5000 3/18/96 How to Identify and Resolve Radio-TV Interference Problems
Related manuals
Manual 150 pages 23.75 Kb

7000 specifications

The 3Com 7000 is a robust and versatile networking solution designed to meet the demands of enterprise environments. Renowned for its reliability and scalability, the 3Com 7000 is highly suitable for organizations requiring efficient data handling and enhanced network performance. This multi-layer switching platform integrates advanced technologies, making it a preferred choice for modern businesses.

One of the standout features of the 3Com 7000 is its modular architecture. This design allows businesses to customize their network according to specific requirements by adding or replacing various modules. The modularity ensures that organizations can scale their network operations without significant downtime or the necessity of overhauling existing infrastructure. Such flexibility is vital for growing enterprises that need to adapt to variable workloads.

The 3Com 7000 also incorporates advanced Layer 3 routing capabilities. This feature enhances the efficiency of data transmission and bolsters the overall responsiveness of the network. By allowing routing functions to occur directly on the switch, it reduces latency and optimizes traffic flow, which is critical for applications requiring high availability, such as VoIP and video conferencing.

Security is another core characteristic of the 3Com 7000. It comes equipped with built-in security protocols and features such as Access Control Lists (ACLs) and VLAN support, which segregate network resources and protect sensitive data. These security measures ensure that only authorized devices can access specific segments of the network, thus fortifying the organization's information security posture.

In terms of management, the 3Com 7000 offers an intuitive interface for monitoring and controlling network operations. It supports various management protocols and software, which facilitate streamlined administration and configuration. This ease of management can significantly reduce the operational burden on IT staff, allowing them to focus on strategic initiatives.

Additionally, the 3Com 7000 is designed for high performance. It supports extensive bandwidth and low-latency communications, making it ideal for high-demand applications. The ability to handle multiple simultaneous connections without compromising speed makes it an excellent choice for enterprises that rely on real-time data processing.

In summary, the 3Com 7000 is a sophisticated networking solution characterized by its modularity, advanced routing capabilities, robust security features, user-friendly management, and high performance. These attributes make it a compelling choice for enterprises looking to enhance their networking infrastructure for a competitive edge.