3Com External ISDN Modem quick start Configuring the 3C882 Isdn Modem Using a Macintosh Computer

Configuring the 3C882 ISDN Modem Using a Macintosh Computer 5

7Double-click the 3ComImpact IQ 3.0 icon to run the SPID Wizard configuration program.

The Select Modem Port screen appears.

8Select the port to which the 3C882 ISDN modem is connected and then click OK.

The SPID Wizard start screen appears.

9Click Next.

After the SPID Wizard checks the ISDN layer 1 status, and configures the switch type, the First Telephone Number screen appears.

10Enter the first telephone number for your ISDN line and then click Next.

After SPID Wizard configures the SPID for the first telephone number, the Second Telephone Number screen appears.

If your ISDN line has a second telephone number assigned to it, enter it here and then click Next. If it does not have a second telephone number assigned to it, leave the field as is and then click Done.

If you entered a second telephone number for your ISDN line, the SPID for the second telephone number is configured.

A message box indicates that the configuration was successful.

11Click Done.

When the automatic configuration process is complete, the on-line registration dialog box appears. Enter your information and then click Register Now. After your information is sent, the Configuration dialog box appears.

This completes the basic configuration procedure.

Refer to the User Guide for instructions regarding advanced configuration and placing calls.