Care and Maintenance

MB2186 O/M.QXD 8/12/02 11:22 AM Page 9

SAFEGUARD AGAINST ACCIDENTAL ERASURE When a new recording is

made, any program material previously recorded is automatically erased and only the new recording remains.

To safeguard valuable recordings from being erased accidentally, the cassette and

the deck are equipped with a special device. On the cassette there is an

erase prevention tab on each side. To prevent accidental erasing, break out these tabs with a screwdriver. If only one side of the tape is to be protected, break out the tab on the left side with the side desired facing you.

To record on a tape in which the tab has been broken, place a piece of adhesive tape over that area.

NOTE: When a tab is broken out, the record button cannot be depressed.

CASSETTE TAPE RECOMMENDATIONS

Standard tape lengths have 15 (C-30), 30 (C-60) and 45 (C-90) minutes of recording time on each side. Longer length tapes of 60 (C-120) minutes of recording time on each side are not recommended. Use only high quality tapes. If a problem develops, check the unit ﬁrst with another cassette to determine if the problem is with the cassette, and not with the unit.

If there is any slack in the tape in the cassette, it should be removed before inserting the cassette. Place a pencil in one of the hubs and rotate toward the outside of the cassette until all slack is taken up.