Radio Shack MICRO-36 owner manual Care, Cleaning the TAPE- Handling Parts

Page 16

Care

Keep the recorder dry; if it gets wet, wipe it dry immediately. Use and store the re- corder only in normal temperature envi- ronments. Handle the recorder carefully; do not drop it. Keep the recorder away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the recorder’s internal components can cause a mal- function and might invalidate its warranty. If your recorder is not performing as it should, take it to your local RadioShack store for assistance.

CLEANING THE TAPE- HANDLING PARTS

Dirt, dust, or particles of the tape’s coating can accumulate on the tape heads and other parts that the tape touches. This can greatly reduce the performance of the re- corder. Use the following cleaning proce- dure after every 20 hours of recorder operation.

1.Press STOP, remove the batteries, and disconnect any other power source.

16Care

Image 16

Contents MICRO-36 ˆ Contents ˆ Features Built-In Microphone and Speaker letˆ a Quick Look at Your Recorder Using Batteries Connecting Powerˆ Preparation Using AC or DC Power Preparation7 Connecting AN Earphone Listening SafelyTraffic Safety ˆ Operation Loading a Microcassette TapeRecording Playing a Cassette Rewinding/Fast-Forwarding Quick RecordStoring a Cassette ˆ Tape TipsPreventing Accidental Erasure Erasing a Cassette Cleaning the TAPE- Handling Parts ˆ CarePress Play to expose the tape-han- dling parts ˆ Specifications Recording Time with MC-60Specifications19 14-1163