Jaton V.90 user manual Problem Error message

Page 42

Problem:

Error message

Solution:

Make sure you selected the correct modem in your

 

communications software.

 

If you are typing from the command line in terminal mode,

 

make sure you typed correctly.

 

Make sure you are issuing the correct AT command.

 

Note: Not all modems support the same AT Command set.

 

Check the AT Command set in this manual to assure that you

 

are using a valid AT Command.

Problem:

Modem communication error or modem not found

Solution:

Make sure you have selected the correct COM Port in your

 

communications software setup.

 

Check all the cable connections and make sure they are

 

secure.

 

In fax software, make sure you have selected the correct fax

 

class.

 

The Port setting in the Control Panel in Windows may not set

 

properly.

Problem:

Modem would not connect.

Solution:

If you have no trouble communicating with any modem except

 

on one particular line, the problem may be with the modem on

 

the other end of that line.

Problem:

Modem would not fax

Solution:

Make sure you have selected Class 1 fax class.

 

Make sure that you do not have another communication

 

program open.

 

Be sure you selected the Fax printer in your word processing

 

program.

Problem:

Fax not found

Solution:

Re-install or re-setup Fax software with the modem installed.

 

The Port setting in the Control Panel in Windows may not set

 

properly; You may have connected the phone line, coming

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Communicator Part 15-Radio Interference Iii Page Trademark Acknowledgments Table of Contents Vii Features IntroductionSpecifications Modem Communication Data Communication StandardsSystem requirements Modes of OperationsFAX Mode Videoconferencing V.80 Support Check List Customer SupportHardware Board LayoutHardware Jumper Setting Modem InterfacesHardware Installation Steps Page Driver installation SoftwarePage Page Page Click on Change Click on Have Disk… button Page Diagnostics Click on Diagnostics tab Click on the modem installed. And then click on More Info… DIAL-UP with Hyper Terminal Page Page Page Change the Maximum speed if necessary Click on Advanced… Software Installation Communicator V.90 CD-ROM Trouble Shooting Modem BasicNvram Mode Data Rate Affected Data Bps DCD Technical tips CcittProblems and solutions Problem Modem would not dial555 3333 To get a pause Problem Error message Problem Modem does not respond to AT Commands AT Commands OverviewAT Commands Basic AT CommandsH1 Modem goes off-hook Command Description V1 Enable long-form result code. Text or Verbose Ext. Result Code Dial Tone Detect Busy Tone Detect DCD Data Carrier Detect option Default=1 Denies RDL request from remote modem +MS=m Select Modulation Default +MS=V.34, 1, 300, 0 see note Page Modulation Possible rate bps 42/V.42 bis MNP AT Commands Command state, transmit break to remote if in reliable mode Fax Class 1 AT Commands Fax Identity CommandsPage IS-101 Voice AT Commands IS-101 Voice AT Commands+VRX Videoconferencing Mode Commands Command Function Default RangeRegiste Function Range Units Saved Default Register SummarySaved in Nvram Register Function Range Units Saved Default Other Limits Exclusive ObligationServices agreement Other StatementsTerms and Conditions Reducing Warranty Claim Rejections Entire ObligationFor Reseller / Vendor Use Only

V.90 specifications

The Jaton V.90 modem is a classic example of 56K technology that revolutionized dial-up internet connections in the late 1990s. As one of the early models supporting the V.90 standard, this modem enabled users to experience faster internet speeds compared to its predecessors. The V.90 protocol allowed for a maximum download speed of 56 Kbps, offering significant improvements over the previous V.34 modem, which capped out at 33.6 Kbps.

One of the standout features of the Jaton V.90 is its ability to adapt to different line conditions, ensuring optimal performance regardless of the quality of the telephone line. The V.90 standard provided a retransmission mechanism that allowed data to be resent if errors occurred during transmission, improving reliability and reducing the likelihood of dropped connections.

The modem incorporates technologies such as error correction and data compression. With built-in error correction protocols like V.42 and MNP, the Jaton V.90 can detect and correct common transmission errors, which is vital in maintaining a stable connection. The data compression technology, which uses MNP Class 5, enhances throughput by compressing data before transmission. As a result, users could effectively increase their upload speeds and minimize latency, creating a more seamless browsing experience.

The hardware features of the Jaton V.90 modem typically include a standard RJ-11 telephone connector, which makes it easy to connect to existing phone lines. The modem may come with both internal and external configurations, allowing flexibility depending on user preferences and system requirements. The external version often features indicator LEDs that provide real-time feedback on connection status, data transfer activity, and power status.

Compatibility is another crucial aspect of the Jaton V.90 modem. Operating with a variety of systems, it was designed to work with Windows, Mac OS, and other operating environments, making it accessible for a wide range of users. Additionally, the modem generally supports various software applications for easy configuration and management.

Ultimately, the Jaton V.90 modem played a pivotal role in facilitating internet access during a transformative period, laying the groundwork for future high-speed connections. While modern broadband solutions have since eclipsed dial-up speeds, the legacy of the Jaton V.90 as a reliable and innovative piece of technology remains significant in the history of internet connectivity.
Top Page Image Contents