JVC HR-J695U Initial Settings, Language Setting, Clock Setting, Preparations, Semiauto Clock Set

– Connections and Plug&Play Setting –

DPerform Plug&Play setup

Plug the AC power cord into an AC outlet. Do not turn on the VCR. The clock and tuner channels will be set automatically. The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels. We call this TV channel the “host channel” and it is a PBS channel in your area.

ATTENTION:

●If you use a cable box, Plug&Play will not function; set the clock and tuner channels separately.

During Initial Auto Clock Set

“Aut” blinks.

Initial Settings

Language Setting

The default setting is “ENGLISH”.

A Access Main Menu screen, then	MAIN MENU
Initial Set screen	TUNER SET
	FUNCTION SET
Press MENU on the Remote. Press rtto	INITIAL SET
move the highlight bar (arrow) to “INITIAL
SET”, then press OK or e.
	PRESS ( , ), THEN (OK)
	PRESS (MENU) TO END

During Auto Channel Set

The channel numbers are displayed as they are scanned and set.

During VCR Channel Set

Channel No. “3” blinks.

A Press POWER to turn on the VCR.

B Press CH+/- on the Remote to select CH”3”,

“4” or “–” (off), then press OK.

● Inserting a cassette during VCR channel

BSelect language

This VCR offers you the language choice to view menus and some messages — in English, Spanish or French. Press rtto move the highlight bar (arrow) to “LANGUAGE”, then press OK or e repeatedly until the desired language is selected.

Press MENU to return to normal screen.

INITIAL SET

CLOCK SET

LANGUAGE ENGLISH

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

set will cause the VCR to turn on

automatically and VCR channel set fails.

So you have to perform VCR channel set

manually. Press STOP/EJECT button on the

VCR to eject the tape. Then, do step 1 –

2 in “Set VCR channel” below.

● If a cassette is already in during VCR

channel set and you press the STOP/EJECT

button on the VCR, the VCR will turn on,

Language selection will be reset to “English” after a power failure occurs.

Clock Setting

Perform clock setting only if the clock has not been set correctly by the Plug&Play setting or if you use a cable box.

eject the tape and turn off. In this case,

VCR channel set will continue. Perform

step 1 – 2 above.

Plug&Play Completed

The received channel number is displayed.

To check the time, press the DISPLAY button or turn off the VCR.

Preparations

AAccess Main Menu screen, then

Initial Set screen

Press MENU on the Remote. Press rtto move the highlight bar (arrow) to “INITIAL SET”, then press OK or e.

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

PRESS ( ,), THEN (OK)

PRESS (MENU) TO END

What to do if Plug&Play setting failed

●If an incorrect time is displayed on the display panel, perform the “Semiauto Clock Set” or “Manual Clock Set” procedure.

●If “–:– –” appears on the display panel, ensure that the antenna cable is connected correctly. If Plug&Play setting is not performed though the antenna cable is connected correctly, perform “Manual Clock Set” and “Auto Channel Set” or “Manual Channel Set”.

Set VCR channel

The VCR channel is the channel on which you can watch the picture from the VCR on the TV when only using the RF connection. To reset the VCR channel, perform the following steps:

APress POWER to turn off the VCR, then press STOP/EJECT

(0) on the VCR for more than 5 seconds. “CH3” appears on the display panel.

BPress CH+/– on the Remote to select “CH3”, “CH4” or “CH–” (OFF), then press OK.

●The VCR channel is preset to “CH3”. Set to “CH4” if “CH3” is used for broadcasting in your area.

The VCR channel will be reset to “CH3” after a power failure occurs.

EFinal preparation for use

Turn on the TV. Select the VCR channel 3 or 4 (or AV mode) on the TV. You can now perform basic playback or basic recording.

●If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the VCR mode indicator lights on the display panel.

B Access Clock Set screen	INITIAL SET
Press rtto move the highlight bar (arrow)
	CLOCK SET
to “CLOCK SET”, then press OK or e.	LANGUAGE	ENGLISH
	GUIDE CHANNEL SET
Setting clock semiautomatically
	SELECT WITH (	, ) AND (OK)
— Semiauto Clock Set	PRESS (MENU) TO END

You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps 1 to 2 in “Preparations” above, then go to the following steps.

NOTE:

●The time set previously will be erased when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.

A Set Auto Clock to ON		CLOCK SET
Press OK or eon the Remote repeatedly	TIME		DATE	YEAR
to move the highlight bar to “AUTO	1:00PM		12/24	02 TUE
	AUTO CLOCK : ON			(CATV)
CLOCK”, then press rtso that “ON” is	HOST CH		: AUTO
	D.S.T.		: AUTO
selected.	TIME ZONE		: AUTO
	PRESS (	,	), THEN (OK)

PRESS (MENU) TO END

BSelect host channel

You can either select “AUTO” or enter a PBS channel number. Press OK or eto move the highlight bar to “HOST CH”, then press rtrepeatedly until “AUTO” or the desired PBS channel number is selected.