Thank you for purchasing the Azden SGM-PD II microphone. Designed for video and audio pro- fessionals, the SGM-PD II is a uni-directional shotgun microphone with a wide frequency response and low noise levels.
Power:
The SGM-PD II must be powered by Phantom- Power. To power the unit, connect an XLR cable to the microphone from a voltage source that supplies between 11 and 52VDC. (see wiring diagram below)
MIC Output:
The SGM-PD II has a balanced 3-pin XLR connector.
Shoe-Mount Holder:
The SGM-PD II is supplied with a camera- mountable mic holder. Snap the near portion of the microphone into the holder. To secure the holder, slide the holder into the camera shoe and tighten the thumbwheel by turning it clockwise.
Shield
Positive (Hot)
Negative (Cold)
SPECIFICATIONS:
Electret Condenser Microphone
Frequency Response | 80-18,000Hz |
Sensitivity | –33dB at 1kHz (0dB=1V/Pa) |
Impedance | 130 Ohms at 1KHz |
MAX SPL (Input Level) | 120dB SPL (1kHz at 1% T.H.D) |
Signal-To-Noise Ratio | 70dB. (1kHz at 1Pa) |
Power (Phantom-Power) | 11 ∼ 52VDC |
Current | ∼2.4mA |
Weight | 110g |
| 3.88oz |
Dimensions | ∅ 21mm x 150mm |
| ∅ 0.827 x 5.9 inches |
Connector | 3-PIN XLR |
Supplied Accessories | Shoe-Mount Holder, |
| Wind Screen, Pouch |
Frequency Response | Super-Cardioid Polar Pattern |
Due to constant improvements, specifications are subject to change without notice.