OPERATION
Setting the Date and Time
After the batteries have been loaded properly, the recorder will be in Standby mode. The display will read “1M01D” (month, day) and “0:00” (hour, min).
Press 
to enter Standby mode and set the date and time as follows:
1.Press and hold 
for 3 seconds. The display will read “SET”
2.Press 
again. The display will read “SET DATE”.
3.Press 
. The “Year” indicator will flash.
4.Press 
or 
to adjust the year and then press 
to set.
The “Month” indicator will flash.
5.Press 
or 
to adjust the month and then press 
to set.
The “Date” indicator will flash.
6.Press 
or 
to adjust the date and then press 
to set.
The “Hour” indicator will flash.
7.Press 
or 
to adjust the hour and then press 
to set.
The “Minutes” indicator will flash.
8.Press 
or 
to adjust the minutes and then press 
to set. The recorder will return to Time mode.
While in Standby mode, press 
(File/Time) to toggle be- tween 12- or
Recording Options
Setting the Record Mode Quality
There are four recording quality options to choose from.
Record Mode / Quality | Maximum Recording Time | |
HP (High Play) | Best | 5.3 hours |
|
|
|
MP (Medium Play) | Very Good | 8.0 hours |
SP (Standard Play) | Good | 16.3 hours |
|
|
|
LP (Long Play) | OK | 50.5 hours |
|
|
|
Page 14 | Coby Electronics Corporation |
|
|