Radio Shack PRO-93 owner manual Trunking Operation

Page 50

The scanner sends the data. To exit the clone mode, re- move the cable.

ˆTrunking Operation

The scanner tracks transmissions that use the Motorola Type I and Type II (such as Smartnet and Privacy Plus) and hybrid analog trunking systems, plus GE/Ericsson (EDACS) type systems extensively used in many com- munication systems.

Trunking systems allocate a few frequencies to many dif- ferent users. When the mobile unit transmits a signal, one frequency is chosen from among the allocated fre- quencies in that trunking system. The user's ID talk group is sent with the signal.

To receive trunking signals, you must store all the trunk- ing control frequencies for Motorola systems or all the trunking group frequencies for EDACS in one bank (see “Storing Known Frequencies into Channels” on Page 25) and input ID codes in the ID memory (see “Storing Talk Group IDs” on Page 58).

Your PRO-93 automatically calculates Motorola voice channel frequencies when it decodes the control chan- nel. This eliminates the need to enter all the Motorola group frequencies.

The control channels are subject to change depending on the day. Therefore enter all the control frequencies in the same bank. If you do not know which is the control channel, it is better to enter all the system frequencies into the same bank. (Refer to the supplied Trunking Guide.)

When the scanner decodes the Motorola control channel and finds the voice channel, the scanner displays the control channel memory location on the top line, the re- ceived frequency with VC (voice channel) on the second line, the bank and control channel memory location num- ber on the third line and the Motorola ID number on the bottom line.

50

Trunking Operation

Page 49 Page 51
Image 50
Page 49 Page 51
Contents PRO-93 Contents Special Features Trunking OperationGeneral Guide to Frequencies TroubleshootingSpecifications Features Character, 4-Line, Alphanumeric Display shows Features FCC Wants You to Know Scanning Legally Pager transmissions Scrambled or encrypted transmissionsPreparation Power SourcesUsing Batteries Preparation11 Charging Rechargeable Batteries Using AC Power Using Vehicle Battery PowerConnecting the Antenna Connecting an Optional AntennaConnecting AN EARPHONE/ Headphones Listening SafelyUsing the Belt Clip Traffic SafetyConnecting an Extension Speaker Transferring Data to and from Another Scanner or a PCAbout Your Scanner Look AT the KeypadAbout Your Scanner Channel Storage Banks Quick StartUnderstanding Banks Search Banks AM ModeUnderstanding Your Scanners Modes FM Mode Motorola ModeEdacs Mode Open and Closed Modes Turning on the Scanner and Setting Squelch OperationStoring Known Frequencies Into Channels Storing Trunking Frequencies Into Channels Storing Text Tags Assigning a Text Tag to a ChannelAssigning a Text Tag to a Group ID Assigning a Text Tag to a BankText Input Chart Buttons CharactersBank Band Finding and Storing Active FrequenciesSearching a Preprogrammed Frequency Range Search bank SR0 Marine band Receive mode FM Operation3132Operation Search bank SR1 CB band Receive mode AM Search bank SR2 Police/Fire band Receive Mode FM GroupSearch bank SR3 Aircraft Receive mode AM Search bank SR4 Ham band Receive mode FMSpecial Notes Listening to a Weather Channel Manually Tuning a FrequencyListening to the Weather Band Displaying Weather Messages WX Alert and Beep Tone ConfirmationUsing Frequency Copy Function Copying a Frequency into a Specified ChannelScanning the Channels Copying a Frequency into the Priority ChannelTurning Channel-Storage Banks Off and On Deleting Frequencies from ChannelsLocking OUT Channels or Frequencies Special FeaturesUsing the Delay Function Locking Out ChannelsReviewing Locked-Out Frequencies Reviewing the Lock-Out ChannelsLocking Out Frequencies Clearing All Locked-Out Frequencies in a Search Bank PriorityClearing a Locked-Out Frequency Special Features Changing the Receive Mode Using the Attenuator Turning the KEY Tone on and OFF Using the Display BacklightUsing the Keylock Changing the Display Contrast Cloning the Programmed DataTrunking Operation Understanding Trunking Setting Squelch for the Trunking Mode Programming Trunking FrequenciesÂ8EBýòVò + +ôýòò +0èýEFE Programming Motorola Trunking Systems UHF-Lo Programming Motorola Trunking System 800 MHz Programming Fleet Maps Size Code Talk Group IDs Storing Talk Group IDs8Wdaý&#& ED ?ýDe$ý&& CEJ0ý&// ?ç 8Wdaý&#& ED ?ýDe$ý& CEJ0ýded Talk Group ID HoldTurning an ID Sub-Bank On or Off Locking Out Talk Group IDsClearing Talk Group IDs Delay Function in ID Indication ModeReviewing Locked-Out Talk Group IDs Open and Closed Modes Clearing All Talk Group IDs in One BankChanging the Open/Closed Mode General Guide to FrequenciesBirdie Frequencies US Weather Frequencies in MHzHam Radio Frequencies UHF High Band MHz HF Band Guide to the Action BandsTypical Band Usage VHF BandBand Allocation Primary UsageAbbreviations Services High Frequency HF Very High Frequency VHF Aircraft Band-108-137 MHz in 12.5 kHz steps BUS Ultra High Frequency UHF Cm Amateur Band 420-450 MHz in 6.25 kHz steps Conventional Systems Band Locally Assigned in 6.25 kHz steps Frequency Conversion Troubleshooting Squelch is not Turn SquelchInitializing the Scanner RESETTING/INITIALIZING the ScannerResetting the Scanner Care Specifications Sensitivity 20 dB S/N82Specifications Specifications83 Limited One-Year Warranty
Related manuals
Manual 84 pages 17.3 Kb

PRO-93 specifications

The Radio Shack PRO-93 is a handheld scanner that has become a favorite among radio enthusiasts and hobbyists since its introduction. This versatile device is known for its exceptional performance in receiving a wide array of frequencies and its user-friendly interface, making it an accessible tool for both beginners and experienced users alike.

One of the defining features of the PRO-93 is its ability to scan various bands, including VHF, UHF, and frequencies used by public service agencies such as police, fire, and emergency medical services. With its 200 channels and dynamic memory allocation, users can easily program and organize their favorite frequencies for quick access. The scanner supports both conventional and trunked systems, allowing users to keep up with the latest communications in their area.

The PRO-93 employs advanced technologies such as computer control and the ability to be interfaced with a PC for programming and updates. Users can quickly manage their channels and settings through software, enhancing their overall experience. The scanner also features a built-in backlit display, providing excellent visibility in low-light conditions, which is especially useful during nighttime operations.

Another key characteristic of the PRO-93 is its versatility in terms of battery life. The scanner operates on standard alkaline or rechargeable batteries, offering the user flexibility in power management. The incorporation of a power-saving mode helps extend battery life, making this scanner ideal for on-the-go use.

In addition to its exceptional scanning capabilities, the PRO-93 includes a range of useful features such as the ability to store up to 50 frequencies into 10 memory banks, allowing easy categorization and retrieval of channels. It also supports multiple modulation modes, including FM, AM, and Narrowband, which broadens the scope of communications that can be monitored.

Overall, the Radio Shack PRO-93 stands out as a reliable and feature-rich handheld scanner. Its combination of extensive frequency coverage, user-friendly programming options, and robust build quality makes it an attractive choice for anyone interested in the world of radio communications. Whether you’re a casual listener or a dedicated scanner aficionado, the PRO-93 delivers an engaging and informative experience.
Top Page Image Contents