SPECIAL FEATURES
USING THE KEYLOCK
Once you program your scanner, you can protect it from accidental program changes by turning on the keylock feature. In this mode, the only controls that operate are SCAN, MANUAL, KEYLOCK ( ), VOL- UME, and SQUELCH.
Note: Turning on the keylock does not prevent the scanner from scan- ning channels.
To turn the keylock on or off, turn on the scanner then hold down KEY- LOCK until the scanner beeps and KEYLOCK appears or disappears.
LOCKING OUT CHANNELS
You can increase the effective scanning speed by locking out individual channels that have a continuous transmission, such as a weather channel. To lock out a channel, manually select the channel then press LOCKOUT (S/S). L/O appears.
To remove the lockout from a channel, manually select the channel then press LOCKOUT. L/O disappears.
Note: You can manually select
To remove the lockout from all channels, follow these steps:
1.While scanning, turn on the memory banks you want to unlock.
2.Press MANUAL.
3.Hold down LOCKOUT for at least 3 seconds. The scanner beeps twice, and all locked out memory channels in the selected banks are unlocked.
26