Replacing the wind screen
If the wind screen shows signs of wear such as tears or holes, replace the wind screen.
JPull the wind screen from the microphone. Gently slide- on the new wind screen and ensure that it fits securely over the microphone.
Storage and transportation
KTurn the microphone into the position shown on the diagram. Rotate the earcups by 90°.
Use the supplied carrying bag for storage and transportation.
If problems occur ...
Problem | Possible cause | Possible solution | |
|
|
| |
You cannot | The microphone | Check if the microphone | |
communicate | connection has been | jack plug is connected | |
via the | pulled out. | correctly. | |
intercom. |
|
| |
The microphone | Increase the microphone | ||
| |||
| sensitivity is | sensitivity (see “Adjusting | |
| adjusted too low. | the microphone | |
|
| sensitivity” on page 4). | |
|
|
|
6