EPOS M Series manual Subwoofer Controls, ++L

Page 4

You have the choice to use the plinth with, or without, the 6mm carpet spikes that are supplied together with it. The spikes can be adjusted to level the speaker and dig deep into carpet to provide mechanical de-coupling of the device into the floor. Metal discs are also supplied to prevent damage to wooden flooring, if required. To fix the plinth to the legs, use the four long bolts.

You may not wish to use the plinth, but mount the speakers flat to the floor, using only the four legs. This can be done by using the four shorter fixing bolts supplied to hold the legs to the bottom of the cabinet. If required, there are four self adhesive pads supplied which can glue onto the ends of the legs or the bottom corners of the plinth to prevent vibration or rattling, if the surface isn’t completely flat.

In the case of a multi-channel system (5.1), connect a shielded cable from the sub-sonic (LFE) output of your receiver to the RCA sockets on the back of the M subwoofer marked low level. You will note that there are two low level input sockets marked L & R, which allow for a stereo signal from your receiver or amplifier.

The specially designed summing circuitry in the M subwoofer combines the L&R low level input signals internally without forcing the source signal into mono.

Set all the controls to the middle position and switch on the M subwoofer using the switch marked POWER. A small LED indicator above the switch will light if everything is OK. Red indicates standby position and green is the indication for normal operation.

SUBWOOFER CONTROLS

You are now ready to set-up the system using the user guide or instructions from your receiver or DVD player. The sound balance can be adjusted with the controls on the rear panel of the M subwoofer.

HI-LEVEL OUTPUTHI-LEVEL INPUT

LOW LEVEL

R

L

R

L

 

 

 

 

IN

OUT

++L

R

DO NOT

BLOCK

VENT

HOLES

 

 

 

40Hz

 

80Hz

 

 

MIN

MAX

60Hz

20Hz

40Hz

120Hz

0

180

VOLUME

LOW FILTER

HI-FILTER

 

PHASE

RED = STANDBY

GREEN = ON

POWER

ON

OFF

POWER CONSUMPTION:

500 WATTS

AC~115V/60Hz

FUSE: T6 A 250V

AC~240V/50Hz

FUSE: T3.15A 250V

230V

AC VOLTAGE

SELECTOR

115V

N15057

RoHS compliant.

300 WATTS HIGH POWERED SUBWOOFER

SERIAL NUMBER

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

AVERTISSEMENT: POUR PRÉVENIR LES RISQUES D’INCENDIE OU DE CHOC ÉLECTRIQUE, ÉVITER D’EXPOSER CET APPAREIL A LA PLUIE OU A L’HUMIDITÉ.

WARNING: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE OF FUSE”.

AVERTISSEMENT: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE”.

DESIGNED AND ENGINEERED IN ENGLAND.

www.epos-loudspeakers.com

IECEE CB No. CN 5679

Page 4

Image 4
Contents Europe USA, Canada and JapanRest of World Important Safety Precautions Safety PrecautionsVentilation UnpackingInstallation and Setup Getting StartedOverview QualitySubwoofer Controls ++LVolume Low Level InputLow Level Output High Level InputPositioning and Tuning Over Temperature CutoutOver Current Cutout Troubleshooting Guide There is no Power WarrantySound Pressure Levels There is no SoundSubwoofer Specifications

M Series specifications

The EPOS M Series represents a pivotal advancement in audio technology, synthesizing robust design with cutting-edge features to elevate the listening experience. This series of headphones and earphones caters to audiophiles and casual listeners alike, carving out a niche for high-quality sound reproduction and exceptional comfort.

One of the highlighted features of the EPOS M Series is its impeccable sound quality. The audio clarity across a wide frequency range makes it suitable for various genres, from classical music to action-packed gaming. The incorporation of high-fidelity drivers allows for deep bass, crisp highs, and balanced mids, ensuring that every note can be appreciated in its intended form.

Comfort is another critical characteristic of the EPOS M Series. These headphones have been ergonomically designed with soft ear cushions and adjustable headbands. This thoughtful approach results in long-lasting comfort, making them ideal for extended wear, whether during gaming marathons or listening sessions. Lightweight materials further enhance user comfort while maintaining durability.

The M Series also embraces the latest technological advancements. It features adaptive noise-cancellation to block out distractions, providing an immersive audio experience. Users can also have the option to adjust noise-cancellation levels to suit different environments, whether on a busy train or a quiet room.

Connectivity options are another strong suit of the EPOS M Series. It supports both wired and wireless options, making it versatile for various devices, be it PCs, smartphones, or gaming consoles. The Bluetooth connectivity provides a seamless, lag-free experience, while wired options ensure maximum audio quality for critical listening.

The series also boasts an impressive battery life, ensuring hours of uninterrupted use. Quick-charging capabilities mean users can get back to their audio journey in no time when the battery runs low.

Finally, the design aesthetics of the EPOS M Series reflect a modern and professional look. The choice of sleek colors and premium materials resonates with both style and substance, making these headphones a fashion statement as much as a piece of audio equipment.

In conclusion, the EPOS M Series stands out by combining exceptional sound quality, comfort, advanced technologies, and stylish design, making it an excellent choice for anyone seeking an extraordinary audio experience. Whether for music, gaming, or multimedia use, these headphones meet the demands of diverse listening preferences.