Removing Skip from
Frequencies
To remove the skip from a frequency while searching, press HOLD to stop the search, press 
or 
to select the skipped frequency, then press S/S until L/O disappears.
To remove the skip from all frequen- cies at once while searching, hold down
Note: If you turned the key tone off (see “Turning the Key Tone On or Off” on Page 25), the scanner does not beep when you hold down S/S-
LOCKOUT.
Removing Skip from Channels
Follow these steps to remove the skip from a channel while scanning.
1.Press MANUAL to stop scanning.
2.Use the number keys to enter the channel number you want to delete.
3.Press MANUAL.
4.Hold down LOCKOUT until L/O disappears.
To remove skip from all channels while scanning, select the banks containing the skipped channels, press MANUAL, then hold down LOCKOUT until the scanner beeps twice.
Note: If you turned the key tone off (see “Turning the Key Tone On or Off” 24
on Page 25), the scanner does not beep when you hold down LOCKOUT.
PRIORITY
The priority feature lets you scan through programmed channels and still not miss important or interesting calls on specific channels. You can program one stored channel in each bank as a priority channel (up to 3 to- tal). As the scanner scans, it checks the priority channels in each selected bank for activity every 2 seconds.
Notes:
•You can skip priority channels. If you skip all priority channels, the scanner displays P CH LOC OUt when you turn on the priority fea- ture. See “Skipping Frequencies/ Channels” on Page 23.
•The priority feature must be turned off to listen to monitor memories.
The scanner automatically desig- nates the first channel in each bank as that bank’s priority channel. Follow these steps to program a different channel as the priority channel.
1.Press PROGRAM.
2.Use the number keys to enter the channel number you want to pro- gram as the priority channel, then press PRIORITY. P appears to the right of the channel number.