Radio Shack PRO-2052 owner manual Troubleshooting, DC 12V jack

Page 64

TROUBLESHOOTING

If your scanner is not working as it should, these suggestions might help you elimi- nate the problem. If the scanner still does not operate properly, take it to your local RadioShack store for assistance.

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

 

 

 

Scanner is on but will not

SQUELCH is not correctly

Adjust SQUELCH clock-

scan.

adjusted.

wise.

 

 

 

 

Only one channel or no

Store frequencies into more

 

channels are stored.

than one channel.

 

 

 

Scanner is totally inopera-

No power.

Make sure the scanner is

tive.

 

plugged into a working AC

 

 

or DC outlet.

 

 

 

 

The AC or DC adapter is not

Be sure the adapter’s barrel

 

connected.

plug is fully inserted into the

 

 

DC 12V jack.

 

 

 

 

The scanner must be reset.

Reset the scanner (see

 

 

“Resetting the Scanner” on

 

 

Page 66).

 

 

 

Poor or no reception

An antenna is not con-

Make sure an antenna is

 

nected or connected incor-

connected to the scanner.

 

rectly.

 

 

 

 

Error appears.

Programming error.

Reprogram the frequency

 

 

correctly, including the deci-

 

 

mal point.

 

 

 

In the scan mode, the scan-

Programmed frequencies

Avoid programming fre-

ner locks on frequencies

are the same as “birdie” fre-

quencies listed under

that have an unclear trans-

quencies.

“Birdie Frequencies” on

mission.

 

Page 55 or only listen to

 

 

them manually.

 

 

 

Scanner will not track a

The transmission might not

Scan another transmission.

trunked system.

use a system that can be

 

 

tracked by your scanner.

 

 

 

 

 

The data frequency is miss-

Find the data frequency

 

ing.

(see “Programming Trunked

 

 

Frequencies” on Page 32).

 

 

 

64

Page 63 Page 65
Image 64
Page 63 Page 65
Contents PRO-2052 Channel Dual Trunking TrunkTracker Home Scanner Features IntroductionPage Your PRO-2052 scanner can receive these bands Frequency Types Range MHz TransmissionsFCC Notice Scanning LegallyContents Troubleshooting Care and Maintenance SpecificationsPC Remote Function General Guide to ScanningConnecting AN Antenna Connecting the Supplied AntennaConnecting an Outdoor Antenna PreparationConnecting Power Using AC PowerConnecting AN Extension Speaker Using Your Vehicle’s Battery PowerConnecting AN Earphone Headphones Listening SafelyTurns the scanner on or off and adjusts the volume Adjusts the scanner’s squelchUnderstanding Your Scanner Look AT the Front PanelSVC service Look AT the Display PUBScan Search Service Banks Understanding BanksUnderstanding Trunking Channel Storage BanksOperation Turning on the Scanner and Setting SquelchStoring Known Frequencies Into Channels Searching Service Banks Limit Search Deleting a Frequency from a Channel Scanning the Stored ChannelsPriority Changing Priority Channels Locking Out Priority ChannelsSpecial Features DelayTurning CHANNEL- Storage Banks on and OFF Locking OUT Channels FrequenciesLocking Out Channels Turning the KEY Tone on and OFFLocking Out Frequencies Skipping Data Signals Using NWR-SAME and Weather AlertChanging Search Speeds Normal Search HyperSearchWhen a Weather Alert Occurs Understanding Fips CodesObtaining Your Area’s Fips Codes Turning on the Same and Weather AlertTesting the Alert Beep Entering Your Area’s Fips CodesTesting NWR-SAME Code Detection Trunk Scanning Types of Trunking SystemsSetting Squelch for the Trunk Scanning Mode Programming Trunked Frequencies Scanning a Trunked Bank You See Trunk SystemSkipping the Trunked Bank Turning Banks On or Off During Trunk ScanningTurning Status Bit Ignore On or Off Switching Edacs Format Using Trunk Scanning Scan DelayIdentifying a Trunked Frequency Edacs ID Range SearchMonitoring an Active ID Locking Out IDsUnlocking a Single ID Unlocking All IDsMonitoring IDS Channel Activity IndicatorsScan Lists Manually Storing IDs into Scan Lists Storing IDs into Scan Lists While SearchingScanning the Scan Lists Automatically Storing an ID in a Scan List LocationDeleting a Stored ID Priority ID ScanningScanning Type I and Hybrid Trunked Systems Size Fleets Sub IDs Block UsedE1P1 E1P2 Block Size Code S12E1P3 E1P4 Block Size Code S12 E1P3 E1P4 Block Size Code E1P5 E1P6 Block Size CodeE1P7 E1P8 Block Size Code E1P7 E1P8 Block Size Code E1P9 E1P10 E1P11 E1P12E1P13 E1P14 Block Size Code Selecting a Preset Fleet MapE1P15 E1P16 Block Size Code Programming a Hybrid System Programming a Fleet MapProgramming the Base and Offset Frequencies Turning the Motorola Disconnect Tone Detect Function On/Off Connecting Scanner to a Computer Software SettingsScanner Settings PC Remote FunctionPC to Scanner Commands For this operation Type this CommandTurning the Remote Function on and OFF KEY02 #PC to Scanner Functions List PC n PC n###PM### ######## SS##RF######## IL###ILR xyy-zz ILR nnnnnnPI # PI @#RG @ TG * @%& ##-$$Scanner to PC Responses Code MeaningScanner Mode Codes Code For this ModeEdacs ID Lockout Review Edacs Search Control Channel 21 VFO General Guide to Scanning Guide to FrequenciesNational Weather Frequencies Birdie FrequenciesGuide to the Action Bands Typical Band Usage MHzVHF Band UHF BandBand Allocation Primary UsageVHF Band Activities Frequencies MHz UHF Band Activities Frequencies MHzAbbreviations Services Meter Amateur Band 50-54 MHz Aircraft Band 108-136 MHzGovernment Band 137-144 MHz Meter Amateur Band 144-148 MHzVHF High Band 148-174 MHz FM-TV Audio Broadcast, VHF Wide Band 174-216 MHz New Mobile Narrow Band 220-222 MHzMeter Amateur Band Military Aircraft Band 237.9-287.8 MHzPublic Safety Band Locally Assigned Conventional Systems Band Locally AssignedConventional/Trunked Systems Band Locally Assigned Trunked Systems Band Locally AssignedFrequency Conversion Troubleshooting DC 12V jackScan for another transmis Resetting Scanner Care and Maintenance Specifications Search Speed Page Page Limited One-Year Warranty Division of Tandy CorporationFort Worth, Texas RadioShack
Related manuals
Manual 72 pages 36.15 Kb

PRO-2052 specifications

The Radio Shack PRO-2052 is a versatile and feature-rich scanner that has captured the attention of amateur radio enthusiasts and professionals alike. This desktop scanner is designed to receive a wide array of frequencies across various bands, making it a valuable tool for monitoring communications.

One of the standout features of the PRO-2052 is its ability to monitor VHF, UHF, and some trunked radio systems. It boasts a wide frequency coverage range from 25 MHz to 1.3 GHz, covering conventional FM, AM, and even the digital communications that have become increasingly popular. This extensive coverage ensures that users can receive a plethora of broadcasts, from local police and fire departments to amateur radio operators and public service communications.

Another significant feature is the scanner's memory capacity, which allows users to store up to 300 channels. This capability is particularly beneficial for those who frequently listen to multiple frequencies, as it provides the flexibility to switch between channels seamlessly. The scanner also supports the ability to organize channels into banks, making it even easier to manage multiple frequencies.

The PRO-2052 comes equipped with a variety of scanning modes, including Narrowband and Wideband scanning, which cater to different listening preferences and needs. Users can employ the Delay function that pauses scanning for a brief period after a transmission is detected, ensuring that they don’t miss any important information. Furthermore, the Priority Scan feature enables monitoring of a selected channel while still continuously scanning other frequencies, adding another layer of functionality.

In terms of usability, the PRO-2052 is designed with a clear and intuitive interface, featuring a backlit LCD that makes it easy to read in various lighting conditions. Its control panel is user-friendly with dedicated keys for commonly used functions, allowing both beginners and seasoned professionals to operate the device with ease.

Furthermore, the scanner has built-in weather alert capabilities, offering users prompt notifications about severe weather conditions, ensuring safety and preparedness. The PRO-2052 is powered either by an AC adapter or batteries, providing the flexibility to operate in various environments.

In summary, the Radio Shack PRO-2052 is a powerful and user-friendly scanner that offers a rich set of features, making it a top choice for those interested in radio communications. Its extensive frequency range, substantial memory capacity, and multiple scanning modes make it suitable for a wide variety of applications, proving to be a reliable companion for enthusiasts and professional users alike.
Top Page Image Contents