
search or folder search may not be performed smoothly. You should not write
POWER SUPPLY
RECHARGEABLE NICKEL -
CADMIUM BATTERY
INSTALLATION
1.Remove the battery compartment cover by sliding the cover away from the
2.Insert the rechargeable
NOTE: Fully charge the rechargeable nickel - cadmium battery before using it for the first time.
3.Close the battery compartment.
4.Plug one end of the supplied AC adaptor into the DC jack. Then plug the other end into an AC wall outlet.
5.When charging is completed, disconnect the AC adaptor plugs from both the
NOTE:
∙The battery takes approximately
∙The indicator on the right side of the
∙Use the
∙The
NICKEL-CADMIUM (NICAD) BATTERIES
2