Honeywell BZG/H manual Mounting, Replacement Parts Wiring, Conduit Sealing Packets

Page 1

InstallationIstructionsforthe

1557-

PK88173

BZE6/V6andBZG/HEnclosedSwitches

MOUNTING

E6 (side mount) and V6 (flange mount): #6 screws (#8 available on certain listings). E6 enclosures meet NEMA 1; V6 enclosures meet NEMA 1 and 3*.

BZG/H; #10 screws. Enclosures meet NEMA 1, 3*, 4*, 13*.

Side and bottom mounting available. Side mount from either side.

1.Mount switches on flat, rigid surface.

2.Sealed, side mounted: Use sealing washers under screw heads on one side; between switch and mounting surface on other side.

3.Unsealed, side mounted: Use lockwashers under screw heads on one side; under nut on other side.

4.Connect conduit to complete seal.

*Except Q plungers.

REPLACEMENT PARTS

WIRING

Connect grounding screw or lug.

Solderless connections:

1.Use only insulated connectors.

2.Position connectors to provide as much spacing as possible.

NOTICE

1.Do not drill or machine housing.

2.Do not lubricate any internal part of switch.

3.Do not allow internal conduit condensation to drain into switch.

4.Do not enlarge mounting holes.

CONDUIT SEALING PACKETS

Packet Listing

 

Cable O.D. In. (mm)

2PA6

.400 - .435 (10,2 - 11,1)

2PA16

.435 - .470 (11,1 - 12,0)

2PA1

 

.530 - .570 (13,5 - 14,5)

Basic switch: order according to catalog listing on basic switch being replaced. Replacement packet includes basic switch, mounting hardware, seal boot and bands where required.

Actuators or Accessories

Part

 

Listing

N2 actuator (roller lever)

 

6PA2

Q2 actuator (roller lever)

 

6PA1

N28 actuator (one-way roller lever)

 

6PA16

Q28 actuator (one-way roller lever)

 

6PA41

N62 Actuators (rod lever)

 

6PA140-E6

Q62 Actuators (rod lever)

 

6PA62

N4 Actuators (manual button)

 

6PA9

Q4 Actuators (manual button)

 

6PA7

N18 Actuators (spring)

 

6PA195

N18 Actuators (spring and bushing)

 

6PA187-E6

Conduit Seal

 

2PA1

 

 

2PA6

 

 

2PA16

Seal Boot (black elastomer)

 

10PA2

Seal Boot (orange silicon)

 

10PA1

Bottom Cover E6

 

3PA13-E6

Bottom Cover V6

 

3PA14-V6

Pilot Light for BZG/H

 

15LT1

LIQUID TIGHT CONDUIT FITTING

2PA17

.170 - .470 (4,3 - 12,0) 1/2 NPT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6PA187-E6 ACTUATOR PACKET

MICRO SWITCH Sensing and Control

Image 1
Contents Mounting Replacement Parts WiringConduit Sealing Packets Liquid Tight Conduit FittingN18 Types WARRANTY/REMEDYActuator Description Internet