Klangoptimierung, Optimising the sound

Klangoptimierung

Die Steifigkeit der Wand sowie die Dämpfung des Hohlraums beein- flussen die Klangqualität eines gehäuselosen Einbaulautsprechers.

Tipp:

1Die beigelegte Schaumstoffmatte bedämpft den Bereich direkt hinter den Lautsprechern. Grundsätzlich empfehlen wir, das Wandvolumen mit Dämmstoffen wie Mineralwolle oder Glasfaser auszufüllen.

WICHTIG: BITTE BEACHTEN SIE BEIM EINSATZ DER DÄMMSTOFFE GELTENDE GESUNDHEITS- UND SICHERHEITSVORSCHRIFTEN.

2Dabei sollte jedoch das Volumen im Bereich von etwa 0,5 Meter um den IP 24 für eine kräftige Basswieder- gabe möglichst keine Dämmstoffe enthalten (siehe Abbildung). Für tie-

fere Bässe kann der dämmstofffreie Bereich erweitert werden.

3Zusätzliche Verstrebungen und Verstärkungen (im Hohlraum) stabili- sieren die Einbauwand und können

so die Klangqualität erhöhen.

4Mit einem Schalter (rechts neben dem Hochtöner) lässt sich der Wiedergabepegel der hohen Töne um 1,5 dB erhöhen oder absenken.

Optimising the sound

The sound quality from an in-wall system without a cabinet is strongly influenced by the stiffness of the wall and damping of the cavity.

Tip:

1A foam piece is supplied to damp the area behind the drive units. We recommend the whole section of the wall cavity to be filled with wadding, such as fibreglass or mineral wool used for insulation.

IMPORTANT: YOU SHOULD CHECK THAT THE MATERIALS YOU

USE MEET THE LOCAL FIRE AND BUILDING REGULATIONS.

2To obtain a satisfactorily bass response, keep the area of approx.

1.5 ft (0.5m) around the speaker clear of wadding (see illustration). If more

bass is required, remove more wadding around the speaker.

3To further optimize the sound quality

of the speaker, improve the stiffness of the wall by adding bracing (inside the wall) around the speaker.

4The tweeter level can be adjusted

± 1.5 dB with the 3-position switch placed on the right hand side of the tweeter.

IP 24 specifications

Dynaudio IP 24 is a premier in-ceiling loudspeaker designed for audio enthusiasts who seek high-performance sound in a discreet form factor. Renowned for its exceptional build quality and advanced technology, the IP 24 excels at delivering a stunning audio experience in various environments, from home theaters to commercial spaces.

One of the standout features of the Dynaudio IP 24 is its custom driver technology. The speaker integrates a sophisticated 24 mm soft dome tweeter, renowned for its clarity and detail. This tweeter is paired with a powerful 7-inch woofer, allowing the loudspeaker to reproduce a rich bass response while ensuring a well-balanced sound. The innovative driver design contributes to a wide frequency response, enabling listeners to enjoy their favorite music or movie soundtracks in true fidelity.

The IP 24 also includes proprietary Dynaudio technologies, such as the high-quality crossover network. This network is engineered to ensure seamless integration between the tweeter and woofer, facilitating accurate sound reproduction across the entire frequency spectrum. This attention to detail ensures that both high and low frequencies are perfectly aligned, resulting in a cohesive and immersive audio experience.

The build quality of the Dynaudio IP 24 is another highlight. Featuring a robust and weather-resistant design, the loudspeaker is suitable for installation in a variety of environments, including bathrooms, kitchens, and outdoor spaces. Its angled design optimizes sound dispersion, delivering audio that fills the room evenly, while the paintable magnetic grille allows for seamless integration into any interior design.

Dynaudio’s commitment to performance extends to the installation process as well. The IP 24 is equipped with a user-friendly mounting system, ensuring a straightforward installation without compromising on sound quality. This ease of installation is appreciated by both professional installers and DIY enthusiasts alike.

In conclusion, the Dynaudio IP 24 stands out as an exceptional choice for anyone seeking high-fidelity sound in a discreet package. With its custom driver technology, advanced crossover network, robust design, and user-friendly installation, the IP 24 encapsulates the essence of Dynaudio’s dedication to quality and performance, making it a stellar addition to any audio setup.