Honeywell TE103NL Main Unit, Indoor Temperature, Calendar and Clock, Wall Mount or Desktop option

Page 5

SPECIFICATIONS

 

FCC STATEMENT

Main Unit

 

 

 

This device complies with Part 15 of the FCC Rules.

Indoor Temperature

 

Operation is subject to the following two conditions:

Proposed operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F

(1) This device may not cause harmful interference, and

Temperature resolution: 0.1°C/0.2°F

(2) This device must accept any interference received,

User-selectable (

°

F or

°

 

C ) temperature display

including interference that may cause undesired operation.

Low battery indicator

 

Calendar and Clock

 

Warning: Changes or modification to this unit not

12/24 hour display in hh: mm format

expressly approved by the party responsible for

Date format: month-day or day-month format

compliance could void the user’s authority to operate

Day of the week: User-selectable in five languages

the equipment.

(English, Spanish, French, German, Italian)

NOTE: This equipment had been tested and found to

Time Zone manual adjustment

comply with the limits for a Class B Digital device,

Dual two-minute crescendo alarms with a four minutes snooze

pursuant to Part 15 of the FCC Rules. These limits are

Freeze pre-alarm with programmable time intervals

Wall Mount or Desktop option

designed to provide reasonable protection against

Remote Sensor

 

 

 

harmful interference in a residential installation. This

 

 

 

equipment, installed and used in accordance with the

Remote Temperature

 

Proposed operating range with alkaline batteries:

instructions, may cause harmful interference to radio

-20.0°C to + 70.0°C/-4.0°F to + 158°F

communications.

Proposed operating range with lithium batteries:

There is no guarantee that interference will not occur in

-38.8°C to + 70.0°C/-38.0°F to +158°F

a particular installation. If this equipment does cause

Temperature resolution: 0.1°C/0.2°F

harmful interference to radio or television reception,

Low battery indicator

 

 

which can be determined by turning the equipment off

RF Transmission Frequency: 433 MHz

and on, the user is encouraged to improve or correct

Maximum number of remote sensors: 1 (included)

turning the interference by one or more of the

RF transmission range: Maximum 100 feet (30 meters)

Temperature transmission cycle: approximately 45 seconds

following measures:

Power

 

 

 

Reorient or relocate the receiving antenna

Main unit: 2 AA size (UM-3) 1.5V batteries (not

Increase the separation between the equipment and

included)

 

 

 

 

receiver.

Remote Sensor: 2 AA size (UM-3) 1.5V batteries (not

Connect the equipment to an outlet on a circuit

included)

 

 

 

 

 

 

 

different from that to which the receiver is connected.

Dimensions

 

 

 

 

 

 

 

Consult the dealer or an experienced radio / TV

Main unit: 2.64(L) x 4.84(H) x 1.02(D) inches

Remote sensor: 2.37(L) x 4(H) x 1(D) inch

 

technician for help.

 

 

 

17

 

18

 

 

 

 

 

 

DECLARATION OF CONFORMITY

STANDARD WARRANTY INFORMATION

We

This product is warranted from manufacturing defects

Name: Hideki Electronics, Inc.

for one year from date of retail purchase. It does not

Address: 7865 SW Mohawk, Tualatin, OR 97062

cover damages or wear resulting from accident, misuse,

Telephone No.: 1-503-612-8395

abuse, commercial use, or unauthorized adjustment and

declare that the product

repair.

Product No.: TE103NL

Note that online product registration is required to

Product Name: Wireless Thermometer with Alarm

ensure valid warranty protection.

Clock

To register your product, go to our Company website

Manufacturer: Hideki Electronics Ltd.

at: www.honeywellweatherstations.com. Click Online

Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk

Product Registration under the Customer Service menu.

Road, Kwai Chung, New Territories, Hong Kong

Contact our Customer Service Hotline 1(866) 443-3543

is in conformity with Part 15 of the FCC Rules.

for assistance with this product and its operation.

Operation is subject to the following two conditions:

Please direct all returns to the place of the original

This device may not cause harmful interference.

purchase. Should this not be possible, contact Hideki

This device must accept any interference received,

Customer Service Hotline for assistance and to obtain a

including interference that may cause undesired

Return Merchandise Authorization (RMA). Returns

operation.

without a return authorization will be refused. Retain

The information above is not to be used as a contact

your original receipt as you may be asked to provide a

copy for proof of purchase.

for support or sales. Please call our customer service

Hideki Electronics, Inc. reserves the right to repair or

hotline (refer to the Standard Warranty

replace the product at our option.

Information) for all injuries instead.

©2008 Hideki Electronics, Inc. All rights reserved.

 

 

Weathertime is a trademark of Hideki Electronics, Inc.

 

The Honeywell trademark is used under license from

 

Honeywell International Inc. Honeywell International

 

Inc. makes no representations or warranties with

 

respect to this product.

19

20

 

 

Image 5
Contents Features Table of ContentsIntroduction Product Overview Main UnitFront View Unit before the remote temperature is displayed Clock AlarmsRemote Temperature Indoor TemperaturePower Dimensions

TE103NL specifications

The Honeywell TE103NL is a state-of-the-art temperature and humidity sensor that boasts advanced features designed for both commercial and residential applications. This cutting-edge device not only assists in maintaining optimal indoor climate but also enhances energy efficiency and comfort levels in various settings.

One of the primary features of the TE103NL is its dual-sensor technology, which accurately measures both temperature and humidity levels. This allows for precise monitoring and regulation of HVAC systems, ensuring that spaces maintain ideal conditions. The device is equipped with a sensitive thermistor for temperature readings, with a range typically between -40°C to 70°C (-40°F to 158°F) and an accuracy of ±0.5°C. For humidity, the sensor measures in the range of 0% to 100% relative humidity with an accuracy of ±2% at standard conditions. This level of precision makes the TE103NL an excellent choice for applications where maintaining specific environmental conditions is crucial.

The TE103NL features a compact design which lends itself to easy installation. It can be mounted on a wall or in a variety of environments, making it versatile for different setups. Additionally, this sensor is designed for compatibility with many building automation systems, enabling seamless integration and offering users valuable data for informed decision-making regarding climate control.

In terms of connectivity, the Honeywell TE103NL supports various communication protocols, promoting interoperability with a wide range of devices. This allows users to connect the sensor to smart home systems or advanced HVAC controls, facilitating remote monitoring and management. The device is also equipped with a sophisticated algorithm that enhances signal processing, minimizing errors and ensuring reliable performance under diverse conditions.

The TE103NL's durable construction ensures longevity and reliability, making it suitable for both indoor and outdoor installations. Its robust housing protects it from environmental factors, allowing it to operate effectively in various climates. This durability is complemented by low power consumption, making it an energy-efficient choice.

In summary, the Honeywell TE103NL stands out for its precise measurement capabilities, versatile installation options, and robust connectivity features. By providing users with accurate temperature and humidity data, this sensor plays a significant role in optimizing comfort and operational efficiency in a wide range of settings.