Fresco Speaker General Information, Specifications, Warranty and Registration, Serial Number

GENERAL INFORMATION

Specifications

System Frequency Response

75–20,000 Hz ± 3 dB

Sensitivity

90 dB/2.83 volts/meter

Impedance

5 ohms

Crossover Frequency

500, 3200 Hz

Components

Air core coils, metal film and low dissipation electrolytic capacitors

Woofer Type

Two 4” (10.2cm) high rigidity aluminum cone with extended throw drive assembly, non-resonance asymmetrical chamber format; bass reflex; unshielded

ATF Mid-Range Driver

1.5" x 6" (3.8cm x 15.2cm) ATF Transducer

ATF High Frequency Driver

1.5" x 2.25" (3.8cm x 5.7cm) ATF Transducer

Power Handling

150 watts rms

Weight

16 lbs. each (7.3 kg)

Size Without Mounting Bracket

24” inches W × 5” inches D × 8.25” inches H (61cm W × 12.7cm D × 21cm H)

Size With Mounting Bracket Flat Behind Speaker 24” inches W × 5.7” inches D × 8.25” inches H (61cm W × 14.5cm D × 21cm H)

Warranty and Registration

Your Fresco i speaker is provided with an automatic Limited 90 Day Warranty coverage.

You have the option, at no additional charge, to receive a Limited 5 Year Warranty coverage. To obtain the Limited 5 Year Warranty coverage you need to complete and return the Certificate of Registration, included with your speakers, and provide a copy of your dealer receipt, to MartinLogan within 30 days of purchase.

For your convenience MartinLogan also offers online warranty registration at www.martinlogan.com.

MartinLogan may not honor warranty service claims unless we have a completed Warranty Registration on file! If you did not receive a Certificate of Registration with your new Fresco i speaker, you cannot be assured of having received new units. If this is the case, please contact your authorized MartinLogan dealer.

Serial Number

Fresco i’s serial number is located near the binding posts. Each unit has a unique serial number.

Service

In the rare event that your MartinLogan product should require service please contact the dealer from whom the product was purchased. In most cases your dealer will be able to assist you in troubleshooting and resolving the issue. If the dealer is unable resolve the issue or if there is no local dealer in your area contact MartinLogan customer service directly by using the service request form at www.martinlogan.com or by calling 785-749-0133.

Before returning any product to MartinLogan for service first contact the service department for an RMA number. Incoming shipments will only be accepted if labeled with a MartinLogan issued RMA number.

Should you be using a MartinLogan product in a country other than the one in which it was originally purchased, please note the following:

1The appointed MartinLogan distributor for any given country is responsible for warranty servicing only on units distributed by or through it in that country in accordance with its applicable warranty.

2Should a MartinLogan product require servicing in a country other than the one in which it was originally purchased the end user may seek to have repairs performed by the nearest MartinLogan distributor, subject to that distributor's local servicing policies. All cost of repairs (parts, labor, transportation) must be borne by the owner of the MartinLogan product.

3If, after owning your MartinLogan product for six months, you relocate to a country other than the one in which it was purchased, your warranty may be transferable. Contact MartinLogan for details.

General Information 17