Honeywell 3800 user manual Add Carriage Return - Mandatory

To program this scanner to work with the Studio Organizer, add the Carriage Return suffix.This will automatically enter a Return character after each scan so you don’t have to hit the Enter or Return key after the bar code reader enters the Student # into the Enter Student # dialog box.

ADD CARRIAGE RETURN - MANDATORY

To program this feature, open the manual included with the scanner and scan the “Add CR Suffix” bar code. (See page 8 of the 3800 manual.)

ALWAYS ON - OPTIONAL

To program the scanner beam to be in ALWAYS ON for hands free scanning, scan the “Automatic Trigger” bar code. (See page 7 of the 3800 manual.)

MANUAL - OPTIONAL

To program the scanner beam for manual trigger operation, scan the “Manual Trigger” bar code. (See page 7 of the 3800 manual.)

PRESENTATION MODE - OPTIONAL

To program the scanner beam for Presentation Mode in which the beam is activated when the scanner ‘sees’ a bar code, scan the Presentation Mode bar code. (See page 7 of the 3800 manual.)

REMOVE SUFFIXES - OPTIONAL

If you wish to remove all suffixes, scan the “Remove Suffix” bar code. (See page 8 of the 3800 manual.)

RESET SCANNER

To revert this scanner to the factory defaults, scan the “Standard Product Defaults” bar code. (See page 4 of the 3800 manual.)

2 June 1, 2010