Honeywell HMLCD19 Section Introduction, Features, Input Timing Limits, Input Level Limits

3.2PRESET MODE CHART

Timing Charts

The monitor shall be capable of supporting the following video timings:

SECTION 1:

INTRODUCTION

1.1INTRODUCTION

Honeywell's HMLCD19 SXGA Color LCD Display features a 19" viewable active matrix LCD screen, with outstanding 1280 x 1024 pixel resolution. When used in PC based applications the

VIDEO

SYNC

(T4) Active

HMLCD19 provides connection points for VGA, PC Sound, and Headphones. CCTV applications are supported by input connections for audio, Y/C (S-Video) and composite video sources while providing a flicker free viewing experience not

(T3) Back Poach (T5) Front Poach

Synch Width (T2)

(T1) Period

Input Timing Limits

H-Sync Pulse Width 1.0 ∝s ≤ Sync Pulse Width ≤ 8.0 ∝s. V-Sync Pulse Width 0.04 ms ≤ Sync Pulse Width ≤0.5 ms.

NOTE: The width of Sync Pulse is out of input timing range, the monitor may operate abnormally. Check Sync Pulse Width of Input Timing.

Input Level Limits

Low level: 0.4V (Max)

High level: 2.4V (Min)

NOTE: For better quality display image, use the timing and polarity shown in the preset mode table. Refer to your video card user guide to ensure compatibility.

Rev. A	12	HMMU000882
		04/09/04

normally experienced with traditional CRT-type monitors. Easy to access front panel OSD display controls including direct contrast, brightness, volume and mute control buttons along with single button source selection for quick and easy adjustments.

1.2FEATURES

•SXGA (1280 x 1024) resolution LCD module

•16,777,216 Color Display

•DPMS (Display Power Management Signaling)

•OSD (On-Screen Display) controls

•Multi-language OSD Menu

•Utilizes DDC1/2B controls. The system will perform Plug & Play feature if both monitor and host system support DDC1/2B protocol.

•Internal speakers

Rev. A	1	HMMU000882
		04/09/04