Earthquake Sound Cinenova 5, Cinenova 7 Five 5 year limited warranty, Product Registration

Page 3

Cinénova Power Amplifiers

Warranty Information

Five (5) year limited warranty

Earthquake warrants the original purchaser that all Factory Sealed New Audio Products to be free from defects in material and workmanship under normal and proper use for a period of five (5) years from the date of purchase (as shown on the original bill of sale with serial number affixed/written on it). The five (5) year warranty period is valid only if an authorized Earthquake dealer properly installs the product and the warranty registration card is properly filled out and sent to Earthquake Sound Corporation. If a non-authorized party installs the product, a ninety (90) day warranty period will be applied.

(A) Five (5) years limited warranty plan coverage guidelines:

First year: Earthquake pays for labor, parts, and ground freight (only in US mainland, not including Alaska and Hawaii) (shipping to us is not covered).

Second year: Earthquake pays for labor and parts only, customer must pay freight both ways.

Third, fourth & fifth year: Earthquake pays labor only. Customer must pay for parts and freight both ways.

(B) Warning:

Products (sent for repair) that are tested by Earthquake technicians and deemed to have no problem(s) will not be covered by the five (5) year limited warranty. Customer will be charged a minimum of one (1) hour of labor (at the ongoing rates) plus shipping charges back to customer.

(C)Earthquake will repair or replace - at our option - all defective products/parts subject to the following provisions:

Defective products/parts have not been altered or repaired by other than an Earthquake factory-approved technician.

Products/parts are not subjected to negligence, misuse, improper use or accident, damaged by improper line voltage, used with incompatible products or have its serial number or any part of it altered, defaced or removed, or have been used in any way that is contrary to Earthquake's written instructions.

(D) Warranty Limitations:

Warranty does not cover products that have been modified or abused, including but not limited to the following:

• Damages to speaker cabinet and cabinet finish due to misuse, abuse or

improper use of cleaning materials/methods.

Bent speaker frame, broken speaker connectors, holes in speaker cone, surround & dust cap, burnt speaker voice coil.

Fading and or deterioration of speaker components & finish due to improper exposure to elements.

Bent amplifier casing, damaged finish on the casing due to abuse, misuse or improper use of cleaning material.

Burnt tracers on PCB.

Product/part damaged due to poor packaging or abusive shipping conditions.

Subsequent damage to other products.

warranty claim will not be valid if the warranty registration card is not Aproperly filled & returned to Earthquake with a copy of the sales invoice.

Warranty card is located on the last page of this manual.

(E) Service Request:

To receive product service, contact Earthquake service department at (510) 732-1000 and request an RMA number (Return Material Authorization). Items shipped without a valid RMA number will be refused. Make sure you provide us with your complete/correct shipping address, a valid phone number, and a brief description of the problem you are experiencing with the product. In most cases, our technicians might be able to resolve the problem over the phone; thus, eliminating the need to ship the product.

(F) Shipping Instructions:

Product(s) must be packaged in its original protective box(es) to minimize transport damage. Shipper claims regarding items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse improperly packed product. Original bill of sale must accompany product returned for service. We encourage you to include with the package a written description of the problem. Ship product to: Earthquake Sound Corp. 2727 Mc Cone Avenue, Hayward, CA 94545. Ph (510) 732-1000. You are responsible for the cost of shipping the product to Earthquake Sound Corporation.

(G) Disputes Resolution:

All disputes - between clients and Earthquake Sound Corporation - resulting from the five (5) years limited warranty policy must be resolved according to the laws & regulations of the county of Alameda -California.

Product Registration

This Cinénova Grande Power Amp can be registered by returning the Product Registration card attached to this manual or by visiting www.earthquakesound.com/product registration. Please also retain the bill of sale, which represents proof of purchase and helps expedite warranty issues.

3

Image 3
Contents Potent combination of speed, grace and power This amp brings new meaning to the phrase ‘gentle giant’Home Theater Magazine U N D Table Of ContentsProduct Registration Five 5 year limited warrantyYour Cinénova Your Cinénova GrandeImportant Safety Instructions Speaker Connections Getting Started with the Cinénova GrandeHandles Master Power SwitchPeak LED Indicators Cinénova Grande Front PanelRear Panel of Cinénova Grande Technology and Materials Cinénova Grande 5 or 7 Filter Settings Input Selection Speaker Connections Getting Started with the CinénovaCinénova 7 Front Panel Cinénova7AC110V/60Hz Rear Panel of CinénovaChassis Dimensions H x W x D Power Rating Per ChannelSignal to Noise Ratio A-Weighted Power RequirementMaintenance Troubleshooting All Cinénova ModelsSound That Will Move You

Cinenova 5, Cinenova 7 specifications

The Earthquake Sound Cinenova series, which includes the Cinenova 7 and Cinenova 5 amplifiers, represents a high-performance solution for audio enthusiasts seeking power, clarity, and reliability in home theater systems. Both models from Earthquake Sound are designed to provide exceptional audio fidelity while accommodating various speaker configurations, making them ideal for audiophiles and home theater aficionados alike.

The Cinenova 7 is a 7-channel power amplifier that delivers a staggering amount of power, with each channel capable of providing up to 200 watts into 8 ohms and even more into lower impedances. One of its standout features is the use of Class A/B amplification technology, which ensures minimal distortion and high linearity, providing listeners with a rich and detailed sound signature. This model is designed to effortlessly drive large speakers, making it suitable for immersive movie experiences and dynamic musical performances.

On the other hand, the Cinenova 5 is a versatile 5-channel amplifier that also boasts impressive output capabilities, delivering around 250 watts per channel into 8 ohms. This model is particularly appealing to those who want to build a robust home theater system without compromising on performance. The Cinenova 5 features LED indicators that provide real-time feedback on operation status and protection, allowing users to monitor their system’s health easily.

Both the Cinenova 7 and Cinenova 5 are equipped with advanced thermal management systems that include high-capacity heat sinks and dynamic fan control, ensuring they maintain optimal operating temperatures even during prolonged use. This results in improved efficiency and longevity, making them suitable for extended listening sessions without the fear of overheating.

Another significant feature across both models is their compatibility with a wide range of audio formats, including multi-channel surround sound setups. Their high input impedance offers remarkable flexibility, allowing them to integrate seamlessly into existing audio systems, whether for movies, music, or gaming.

Overall, the Earthquake Sound Cinenova series stands out for its exceptional build quality, innovative technology, and superior audio performance. These amplifiers are ideal for anyone looking to elevate their audio experience and achieve cinema-quality sound within the comfort of their own home.