Compaq 243850-002 manual Routine Computer Care Shipping Preparation

Page 53

F

Routine Computer Care and

Shipping Preparation

Routine Computer Care

Follow these suggestions to take care of your computer and monitor:

Operate the computer on a sturdy, level surface. Leave a 3-inch (7.6-cm) clearance at the back of the system unit and above the monitor to permit the required airflow.

Never operate the computer with the cover or side panel removed.

Never restrict the airflow into the computer by blocking the front vents or air intake. Do not place the keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also restricts airflow.

Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold. For information about the recommended temperature and humidity ranges for your computer, refer to Appendix A, “Specifications,” in this guide.

Keep liquids away from the computer and keyboard.

Never cover the ventilation slots on the monitor with any type of material.

Turn off the computer before you do either of the following:

Wipe the exterior of the computer with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish.

Occasionally clean the air vents on the front and back of the computer. Lint and other foreign matter can block the vents and limit the airflow.

Hardware Reference Guide

F–1

Image 53
Contents Hardware Reference Guide Page Contents Specifications Hard Drive Installation Guidelines Standard Configuration Features Product FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsCompaq Easy Access Keyboard Components Easy Access KeyboardLocking and Unlocking the Easy Access Buttons Easy Access SoftwareReprogramming the Easy Access Buttons Windows Logo Key Easy Access Paper Icon InsertSpecial Mouse Functions Serial Number Location Product Features Installation Sequence Hardware UpgradesServiceability Features Hardware Upgrades Removing the Computer Cover Replacing the Computer Cover Removing Bezel Blanks Removing the Front BezelDIMMs Installing Additional MemoryInstalling DIMMs Installing a Dimm Removing an Expansion Slot Cover Installing or Removing an Expansion CardRemoving or Installing an Expansion Card Hardware Reference Guide Drive Positions Removing a Drive from the Drive Bay Installing Additional Drives Hardware Reference Guide Installing a Hard Drive into a 3.5-inch Drive Bay Removing the Power Switch Bracket Connect the signal 1 and power 2 cables to the hard drive Compaq Evo Desktop Intel Pentium SpecificationsCompaq Evo Desktop Intel Pentium III/Celeron 145 W Specifications Using the Cable-Select Feature with Ultra ATA Devices Hard Drive Installation GuidelinesGuidelines for Installing Ultra ATA Devices Scsi Devices Guidelines for Using Scsi DevicesHard Drive Installation Guidelines Scsi Controllers Guidelines for Installing Optional Scsi DevicesScsi Cables Using a Scsi CableUsing SCSISelect with Scsi Devices Choosing the Quiet Drive Options Hard Drive Installation Guidelines Battery Replacement Type Type Replacing a Coin Cell Battery Type Security Lock Provisions Installing a Security LockInstalling Compaq Type 2 Security Bracket may vary by model Hardware Reference Guide Installing a Kensington Cable Lock may vary by model Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Electrostatic Discharge Routine Computer Care Routine Computer Care Shipping PreparationCleaning CD-ROM Drive PrecautionsSafety OperationShipping Preparation Routine Computer Care and Shipping Preparation Index Index-2