Peripherals Connection | Source Technologies STM.57B manual

When the printer is installed initially or when you face a problem, you can run the self test and check the information about

-Control Circuit, Mechanism, Print Quality, ROM Version

After checking with self-test and no issues are found, you can examine other devices and software. This function is working independent of devices and software.

●Motor protection from being overheated

The motor should be stopped and cooled about more than 30 seconds after continuous printing 1.5 meter

4. Peripherals Connection

This product can communicate with other devices via Bluetooth communication and cable.

4-1. Bluetooth Connection

1.The Printer can be connected to devices equipped with Bluetooth communication capacity (PDAs, PCs, etc.)

2.Use the Bluetooth connection function supported by the device to connect

to the printer.

NOTE

Refer to the Bluetooth Manual for more details on connection.