Advantech PWS-8033M manual Powering up for the First Time, Calibrating the Touchscreen

Page 20

2.2Powering up for the First Time

After you have charged the PWS-8033M for about 3 hours the device is ready to be used. You can now start up the PWS-8033M when you can calibrate the touch screen, practice with the stylus and set the date, time and zone. Turn on your device by pressing the power button on the front panel.

2.3Calibrating the Touchscreen

The calibration screen automatically appears when the unit is powered on for the first time or after the system is reset.

1.Tap the center cross hair firmly and accurately with the stylus. The cross hair moves to the next location.

2.Follow the cross hair and continue tapping until the screen has been calibrated.

3.After calibration is finished, press the Enter key to save the settings or press Esc to revert to the previous settings.

Note! To recalibrate the screen at any time, tap Start Settings Control Panel. Then double-tap Stylus. Tap the Calibration tab, and tap Recalibrate.

2.4Setting the Time and Date

1.Tap Start Settings Control Panel.

2.Double-tap Date/Time.

3.Tap the arrows next to the month to select the correct month.

4.Select a field in the time box and tap the arrows next to the time to change the value of the field.

5.Tap the drop-down arrow next to Time Zone to select the correct time zone for your area.

6.Check the box next to Automatically adjust... to have the OS automatically update the time for daylight saving.

7.Tag Apply to save the settings.

2.5Adjusting the Screen Brightness

1.Tap Start Settings Control Panel.

2.Double-tap OEMs Utility.

3.Click the Display Manager tab.

4.Under Backlight Control, click the Dark arrow to make the screen darker, or click the Bright arrow to make the screen brighter.

5.Click OK to save and exit the utility.

PWS-8033M User Manual

14

Image 20
Contents PWS-8033M Product Warranty 2 years Copyright AcknowledgementsDeclaration of Conformity Technical Support and AssistanceSafety Instructions Chapter General InformationAdvanced Settings Chapter Introduction Features & SpecificationsPWS-8033M Military PDA Specifications Package Contents Optional AccessoriesFamiliarizing Yourself with the PWS-8033M Front ViewRight View Bottom View Left ViewBack View Top View4-In-1 Battery Charger Optional Cradle Optional Page Installation Getting Started Installing the BatteryCharging the Battery Charging the Battery with the Adapter Charger Charging the Battery with the CradlePowering up for the First Time Setting the Time and DateAdjusting the Screen Brightness Calibrating the TouchscreenUsing the Hardware Using the Stylus Adjusting the Double-Tap RateTap Start Settings Control Panel Keypads and Function ButtonsInserting an Micro SD Memory Card Inserting a CF CardRemoving a CF Card Gprs SIM Card Set Up Connecting Devices to the PWS-8033MConnecting USB Connecting a USB Type aConnecting a Serial Device Connecting a Mini USB Type BConnecting Headphones and a Microphone Connecting to the Cradle OptionalConnecting USB Connecting a Serial CableGetting Connected Installing Microsoft ActiveSync Connecting to Your ComputerGetting Connected Connecting with Bluetooth Connecting to a Wlan Wi-Fi Connecting to an Existing Network Add a New NetworkChanging the Advanced Settings View Wireless Networking Log Information Connecting GPS Connecting Gprs Click Control Panel then Network and Dial-upConncetions Page Advanced Settings Checking the Battery Status Optimizing Battery LifeChanging the Automatic Power Settings Switch state to UserPerforming a System Reset Adjusting Backlight SettingsTap Start Settings Control Panel Tap OEMs Utility Performing a Software reset re-bootChanging the Screen Resolution Rotate Screen