Dynaudio Focus owner manual Distance to back and side walls, Adapting the bass reflex port

Page 8

Positioning

Distance to back and side walls

Every loudspeaker not only disperses sound energy directly into the room, but also to the side and even backwards. As a result, time-delayed reflections occur and add to the original music signal. Thus, when loudspeakers are positioned too close to walls, the sound quality can be restricted.

The Focus models were developed to be placed free-standing, and therefore they reach their optimum performance when positioned as clear of any walls as possible.

X To reduce possible influences from the back and sidewalls, the distance to these boundaries should ideally not be less than 0.5 meter.

 

 

 

 

 

 

Adapting the bass reflex port

 

 

 

 

 

 

To minimize low frequency reflections, which will be heard as a thickening of the sound,

 

 

 

 

D

 

the Focus models can be adapted to the room’s acoustic character by using foam plugs

D

 

in the bass reflex port. This will essentially attenuate the room-induced boost in the low

 

 

 

 

D ≥

0.5 m

frequency range by dampening the deep frequencies, yielding a more clear and tight

 

 

 

 

 

 

 

 

sound and minimized backwave reflections when the loudspeaker is positioned near rear

 

 

 

 

 

 

walls.

Fig. 4 Distance to walls.

X Fully insert the foam port plugs packed with your loudspeaker into the bass reflex tube,

 

 

to attenuate the bass output (if required).

6

Dynaudio Focus

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Focus Contents Inhaltsverzeichnis Introduction Safety Instructions Used expressions and symbolsAbout this guide High Sound Pressure LevelsConnecting Connecting the loudspeakersChoice of loudspeaker cable Connecting surround speakersBi-wiring/bi-amping Excessive Brightness PositioningGeneral recommendations Distance to back and side walls Adapting the bass reflex portSpikes with Sharp Peaks Floor-standing loudspeaker set-upCompact loudspeaker set-up Grille Loudspeaker Toe-InRoom and furniture influence Center speaker Multi-Channel SetupLoudspeakers for multi-channel setups Subwoofer Multi-channel loudspeaker setupRear speakers Running-in / Care & Maintenance Distorted Output SignalsCleaning the loudspeakers WarrantyAggressive Cleaning Fluids Einleitung Verwendete Begriffe und Symbole SicherheitshinweiseZu dieser Anleitung Hohe SchallpegelHinweise AnschließenLautsprecher anschließen Hinweis Surround-Lautsprecher anschließenWahl des Lautsprecherkabels Aufstellen Allgemeine EmpfehlungenIntensive Lichteinwirkung Die folgenden Hinweise beziehen sich auf Abb≥ 0,5 m Abstand zu Rückwand und SeitenwändenDie Basswiedergabe anpassen Spikes MIT Spitzen Enden Standlautsprecher aufstellenKompaktlautsprecher aufstellen Frontabdeckung Auf den Hörplatz ausrichtenWohnraumeinrichtung Center-Lautsprecher Mehrkanal-AnlageLautsprecher für eine Mehrkanal-Anlage Aufstellen der Mehrkanal-Lautsprecher Rear-Lautsprecher hintere LautsprecherVerzerrte Verstärkersignale Inbetriebnahme / PflegehinweiseDie Lautsprecher reinigen GarantieAggressive Reinigungsmittel Technical Specifications / Technische Daten Broschures / BroschürenDynaudio A/S

Focus specifications

Dynaudio Focus represents a significant innovation in the world of high-end audio, offering a harmonious blend of advanced technology and elegant design. Renowned for their commitment to creating speakers that deliver pristine sound reproduction, Dynaudio has embedded several cutting-edge features in the Focus series, catering to audiophiles and casual listeners alike.

At the core of the Dynaudio Focus speakers is their proprietary driver technology. Each speaker is equipped with bespoke drivers that produce a detailed and accurate sound across the entire frequency spectrum. The customized woofers and mids utilize a lightweight yet rigid construction, enabling them to handle high power levels while minimizing distortion. These drivers are engineered to create a natural and immersive audio experience, ensuring that vocals, instruments, and even the subtlest of cues are captured flawlessly.

One standout feature of the Focus series is the incorporation of DSP (Digital Signal Processing) technology, allowing for precise control over the audio output. This technology optimizes speaker performance based on the room’s acoustics, ensuring that every listener experiences sound as intended by the artist. The integration of DSP also allows the user to customize sound profiles, tailoring the listening experience to individual preferences.

The Dynaudio Focus speakers are also equipped with wireless capabilities, making them an excellent choice for modern homes where connectivity and ease of use are paramount. With built-in support for high-resolution streaming over Wi-Fi, users can enjoy their favorite music in unparalleled quality without the clutter of wires. The intuitive app allows for simple setup and control, turning a smartphone or tablet into a powerful music hub.

Aesthetically, the Focus series maintains Dynaudio's commitment to elegance. Available in various finishes including wood veneer and high-gloss lacquer, the speakers not only sound extraordinary but also serve as stunning pieces of furniture. The sleek design seamlessly integrates into any home décor, highlighting the brand’s emphasis on marrying function with form.

In essence, Dynaudio Focus speakers stand as a testament to the brand’s legacy of exceptional sound engineering. With their advanced driver technology, intelligent DSP, wireless connectivity, and sophisticated design, they elevate the listening experience to new heights, making them a worthy investment for anyone serious about audio quality. Whether you're an experienced audiophile or simply someone who appreciates great sound, the Dynaudio Focus series is poised to deliver an unforgettable auditory journey.
Top Page Image Contents