Acer S670G, M670G manual Remove CPU cooler, Remove memory

Page 56

Remove CPU cooler

Process:

1.Remove cooler power cable from M/B “CPU-F2”.

2.Release screw 1 first, then fixes screw 2, screw 3 & screw 4 (As Picture).

3.Remove Cooler from the Retention module.

Remove memory

Process:

1.Remove the first Memory from DIMM.

2.Remove the second Memory from DIMM2 (Optional by SKU).

50

Image 56
Contents VeritonM670G/M670 S670G/S670 Service Guide Revision History Copyright DisclaimerConventions MessagesPreface Troubleshooting Jumper and Connector Information System Specifications FeaturesFDD USB On-board connectors Power Supply Main board Placement Page Block Diagram VeritonM670G/ M670 Front Panel Label DescriptionVeritonM670G/ M670 Rear Panel VeritonS670G/S670 Front Panel VeritonS670G/S670 Rear Panel Processor Hardware Specifications and ConfigurationsBios Hotkey List System Memory Main Board Major ChipsMemory Combinations Audio Interface Sata InterfaceEnvironmental Requirements Floppy disk drive InterfaceUSB Port Power Management DevicesPage Chapter System Utilities Entering Setup Parameter Description Product Information Standard Cmos Setup Parameter Description OptionsAdvanced Setup Advanced Chipset Setup ASFIntegrated Peripherals EPP+ECP Power Management PC Health Status Frequency/Voltage Control Bios Security Features TCG/TPM SupportLoad Default Settings Save & Exit Setup Exit Without Saving Machine Disassembly and Replacement General Information Before You Begin Disassembly Procedure VeritonM670G/M670 VeritonS670G/S670 Remove side cover Process Remove CPU fan pipeRemove Cards Remove HDD Data Cables Remove HDD power cable Remove ODD Data cableRemove Cables Remove HDD ProcessRemove card reader Remove FDD Cable Remove ODD MB power cable Remove System FAN Remove mother board Remove CPU cooler Remove memoryRemove CPU Remove I/O shieldingTroubleshooting Chapter Page Atxpower ATX 24-pin Power Connector Page Page Page FRU Field Replaceable Unit List Exploded Diagram Description70X70X15FAN