64 | 4 Upgrading your computer |
4Pull out the drive rails that hold the hard disk to the housing. Set the drive rails aside.
5Slide the hard disk frame to the left (d); then gently move it out (e) and pull it up to detach it (f).
6Install the new hard disk into the housing. Secure it with the drive rails you removed earlier and connect the power and hard disk cables to the new hard disk.
7Reinstall the drive frame into the housing.
8Reattach the CD or DVD drive and the floppy drive cables.
Note: Make sure that the other ends of the disk drive cables are securely connected to their corresponding connectors on the mainboard.
9 Replace the computer cover (see page 55).