Acer M5640, M1640 manual Parameter Description Options, Cpu

Parameter	Description	Options
Extended	The BIOS determines
Memory Size	how much extended
	memory is present
	during the POST. This is
	the amount of memory
	located above 1MB in the
	memory address map of
	CPU
Total Memory	Total memory size for
Size	the system
IDE Channel	Hard disk drive	[Enter] for detection options
X Master	connected to channel X	[Auto]: BIOS automatically detects IDE
IDE Channel	master or slave port. To	devices during POST (default)
X Slave	enter the IDE Master or	[None]: No IDE devices are used and the
	Slave setup, press	system will skip the automatic
	[Enter]. The IDE	detection step and allow for faster
	CD-ROM is always	system start up
	automatically detected	[Manual]: Manually input the correct
		settings
		[Access Mode]: To set the access mode for
		the hard drive.
		The four options are:
		CHS/LBA/Large/Auto (default: Auto)
		Cylinder: Number of cylinders
		Head: Number of heads
		Precomp: Write precomp
		Landing Zone: Landing Zone
		Sector: Number of sectors
Video Setting	Select the type of
	primary video subsystem
Halt on	This item enables use to	All Errors
	select the situation if the	No Errors
	BIOS stops the POST	All, But Keyboard
	process and the	All, But Diskette
	notification	All, But Disk/Key

26