Chapter 2
System Utilities
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises.
To activate the BIOS Utility, press mduring POST (when “Press <F2> to enter Setup” message is prompted on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter
PhoenixBIOS Setup Utility
| Information | Main | Security | Boot | Exit |
|
|
| |
|
|
|
|
|
|
| |||
| CPU Type : |
| Intel (R) Pentium (R) M processor 1.86GHz |
|
|
| |||
| CPU Speed : |
| 1866MHz |
|
|
|
|
| |
| IDE1 Model Name : | TOSHIBA MK8025GAS - (PM) |
|
|
| ||||
| IDE1 Serial Number : None |
|
|
|
|
| |||
| IDE2 Model Name : | PIONEER |
|
|
| ||||
| IDE2 Serial Number : None |
|
|
|
|
| |||
| System BIOS Ver: |
| V0.06A |
|
|
|
|
| |
| VGA BIOS Ver |
|
| 1277 |
|
|
|
|
|
| KBC Ver |
|
| 07.07 |
|
|
|
|
|
| Serial Number |
|
| xxxxxxxxxxxxxxxxxxxxxx |
| 22 Byte |
|
| |
| Asset Tag Number |
| N/A |
|
|
|
| ||
|
|
|
|
|
|
| |||
| Produce Name |
|
| Aspire 3610 |
|
| 32 Byte |
|
|
|
|
|
|
|
|
|
| ||
| Manufacturer Name: |
| Acer |
|
| 16 Byte |
|
| |
|
|
|
|
|
|
| |||
| UUID: |
|
| xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx | 16 Byte |
|
| ||
|
|
|
|
|
| ||||
|
|
|
|
|
|
| 32 Byte |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| F1 Help | ↑ ↓ | Select Item | F5/F6 Change Values |
| F9 Setup Defaults | |||
|
|
|
|
|
| ||||
| Esc Exit | ← → Select Menu | Enter | Select | F10 Save and Exit | ||||
Chapter 2 | 29 |