Metrologic Instruments TECH 8 manual Labels, Applications and Protocols

Page 5

Labels

One label is found inside the window of the scanner noting that this device is a CDRH Class IIa laser product and EN 60825-1 LASERKLASSE 1. Also, on the scanner is a label on the back of the unit. This label contains information such as the model number, the date of manufacture and the serial number. The following are samples of the labels that are found on the unit.

Applications and Protocols

The following chart lists the version identifiers for all the communication protocols. Listed on each scanner is a model number. The model number includes the scanner number, revision label, and denoted version identifier. For example, if the model number is MS870-B1, the scanner is an MS870, B is the revision level, and 1 is the version identifier.

 

B UNITS

 

Scanner

Version

Communication

 

Identifier

Protocol(s)

MS870

1

RS-232, OCIA

MS870

15

Light Pen Emulation

2

Image 5
Contents Mlpn September1998 Metrologic INSTRUMENTS, INCCopyright Locations USA Corporate Headquarters EuropeSouth America Table of Contents Introduction Unpacking ListScanner Version Communication Identifier Protocols LabelsApplications and Protocols Configuration of the Scanner to the Host System MaintenanceScanner Connections Attaching the Scanner to the Stand and Work Surface Scanning Bar Codes Mechanical Appendix a Tech 8 Laser Bar Code Scanner SpecificationsEnvironmental OperationalAppendix B Version A1 Pin Assignments for the Mil spec ConnectorPinfunction Version A15 Pin Assignments for the Mil spec ConnectorAppendix C Warranty and Disclaimer Limited WarrantyDisclaimer Remarque Appendix DAnmerkung Patents Appendix EAsic ESD IndexUL/CSA