Metrologic Instruments MS6720 manual RS-232 only

Page 29

RS-232 only

SYMPTOMS

POSSIBLE CAUSE(S)

SOLUTION

 

 

 

Power-up OK

Com port at the host not

Check to make sure the baud rate

 

working or not configured

and parity of the scanner and the

Scans OK

properly

communication port match and the

 

 

program is looking for “RS-232"

Does not

Cable not connected to the

data.

communicate

proper com port

 

properly to the

 

 

host

Com port not operating

 

 

properly

 

 

 

 

NOTE: Metrologic’s default of 7 data bits, space parity is usually what is expected when an IBM compatible type PC is configured for 8 data bits, no parity.

SYMPTOMS

SOLUTION

 

 

Host receiving data but data does not

Check that the scanner and host are

look correct

configured for the same interface format

 

 

Characters are being dropped

Add some intercharacter delay to the

 

transmitted output. This can be programmed

 

into the scanner through ScanSelect

 

 

RS-232 Demonstration Program

If an RS-232 scanner is not communicating with your IBM compatible PC, key in the following BASIC program to test that the communication port and scanner are working. This program is for demonstration purposes only. It is only intended to prove that cabling is correct, the comx port is working, and the scanner is working. If the bar code data displays on the screen while using this program, it only demon-strates that the hardware interface and scanner are working. At this point, investigate whether the application software and the scanner configuration match. If the applica-tion does not support RS- 232 scanners, a software wedge program that will take RS-232 data and place it into a keyboard buffer may be needed. This program tells the PC to ignore RTS-CTS, Data Set Ready (DSR) and Data Carrier Detect (DCD) signals. If the demostration program works and yours still does not, jumper RTS to CTS and Data Terminal Reading (DTR) to DCD and DSR on the back of your PC.

10 CLS

20 ON ERROR GOTO 100

30OPEN “COM1:9600,S,7,1,CS0,DS0,CD0,LF” AS #1

35PRINT “SCAN A FEW BAR CODES”

40LINE INPUT #1, BARCODE$

50PRINT BARCODE$

60K$ = INKEY$: IF K$ = CHR$(27) THEN GOTO 32766

70GOTO 40

100PRINT “ERROR NO.”; ERR; “ PRESS ANY KEY TO TERMINATE.”

110K$ = INKEY$: IF K$ = “” THAN GOTO 110

32766 CLOSE: SYSTEM

32767 END

26

Image 29
Contents MS6720 Hand-Held Laser Scanner Installation and User’s Guide Table of Contents Appendix B Appendix aAppendix C Appendix DIntroduction MCA Metrologic Connector Adaptor Mlpn MCA951 Scanner and AccessoriesQuick Start Operational Test Scanner Installation Powered by External Power Supply Scanner Installation Powered by Host Device Manufacturer’s Recommendation Complete Stand Kit Mlpn MS6720 StandGreen and Red LED Scanner PartsThree Beeps after power up Audible IndicatorsOne Beep Razzberry ToneFailure Modes Three Beeps on power upFlashing Red and One Razzberry Tone Flashing Red and Green and Two Razzberry TonesNo Red or Green LED Visual IndicatorsLabel Normal Depth of Field Depth of Field SpecificationsShort Depth of Field Extended Depth of Field Optional Depth of Field Normal Depth of Field Short Depth of Field Automatic Turn-On Specifications IR SensorProjection Axis Omnidirectional Scan VolumeScan Pattern Specifics Cross-Sectional Scan Pattern Maintenance All Interfaces All Interfaces Possible CAUSES/SOLUTIONS Keyboard Wedge Only RS-232 only Scanner Version Identifier Communication Protocols Applications and ProtocolsKeyboard Type Keyboard Country TypeAppendix a Design SpecificationsMechanical ElectricalEnvironmental OperationalAppendix B Default SettingsDTS/NIXDORF NCR F NCR S ACK/NAK Ocia Pin Assignments Cable Pin Assignments for the Coil Cable Appendix CVersion 9 Ocia Version 11 Pin Function Version 14 Version 15 Ltpn FuPinction FunctionVersion 14 Version 15 Ltpn Pin Function FuPinction Pin Assignments for the MCA951 DEC9SPin Male DIN Pin Male mini-DIN Function Pin Female DINPin Function Appendix D Warranty and Disclaimer Limited WarrantyDisclaimer Remarque Appendix EAnmerkung Patents Appendix FMCA IndexLtpn System interfaces

MS6720 specifications

The Metrologic Instruments MS6720 is a highly versatile and efficient laser scanner that has gained recognition in various industries, particularly in retail, warehouse management, and manufacturing. With its advanced design, this device combines cutting-edge technology and user-friendly features to streamline operations and enhance accuracy in data capture.

One of the standout features of the MS6720 is its impressive scanning speed. It is capable of scanning and decoding 1D and 2D barcodes at an exceptional rate, making it suitable for high-volume environments where efficiency is critical. Users appreciate the 100 scans per second capability, which ensures that transactions are processed quickly, reducing wait times in point-of-sale scenarios.

The MS6720 employs a sophisticated laser scanning technology that allows it to read barcodes from a variety of surfaces, including glossy and curved surfaces, without compromising performance. This flexibility is particularly advantageous in retail settings where products may come in diverse packaging formats.

Another key characteristic of the MS6720 is its robust build quality. Designed to withstand the rigors of daily use, it features a durable enclosure that can resist shocks and drops. This rugged design not only enhances longevity but also minimizes the need for frequent repairs or replacements, making it a cost-effective solution.

The scanner is also equipped with advanced connectivity options, supporting both USB and RS-232 interfaces. This versatility allows for seamless integration into existing systems, whether they are traditional or modern networks. Additionally, the MS6720 is compatible with a wide range of operating systems, including Windows, macOS, and various mobile platforms, ensuring that it can be used in diverse environments.

User-friendliness is a priority in the MS6720's design. It comes with an intuitive interface that simplifies operation for users, allowing them to quickly become familiar with its functionality. Furthermore, the scanner features an adjustable stand, enabling users to set it at an optimal angle for reading barcodes comfortably.

The Metrologic Instruments MS6720 not only excels in performance and durability but also stands out for its affordability. It offers organizations a reliable solution to improve their operations without breaking the bank. Overall, the MS6720 is an excellent choice for businesses seeking to enhance their scanning capabilities and improve overall efficiency in barcode management.