Scanning Different Sized Originals Together
It is possible to load originals of different sizes together in the feeder and scan them in one operation.
To do this, make the following settings in the Network ScanGear Main Window.
1 In the Main sheet, select Different Sizes for Original Size.
The Different Sizes dialog box appears.
4
Scanning
2 Check the lists of possible combinations and select the appropriate combination of original sizes.
For sizes such as A3 and A4, where the longer side of the smaller size is the same as the shorter side of the larger size, select Same Width. For combinations of sizes such as A3 and B4 with no sides of the same length in common, select Different Width.
3 After making the settings, click the OK button to close the dialog box.
Scanning from the Feeder |