Introduction

This manual contains a listing of the available parts for the Copiscan 8000 Series, firmware version D8, scanners. This listing includes individual parts, assemblies, kits, and service tools. The illustration figure and the parts list are on the same page.

The parts listing contains several columns.

Callout Description

Part No.

Functional Description

Comments

•The Callout refers to the callout number for this part, assembly, or kit as indicated in the illustration figure.

•The Description refers to the name given the part on the part as it is inventoried.

•The Part Number is the number by which the part is ordered.

•The Functional Description refers the use of the part (if different from the Part Description).

•The Comment field is used to indicate compatibility to firmware version, relationship to a part or assembly, etc.

Assemblies and kits

Assemblies, such as cameras, are factory prealigned and calibrated. Individual parts for these assemblies normally are not available. Replace only with another assembly.

Kits contain a group of parts but are not factory aligned and calibrated. An example is the transport motor kit. This kit contains the motor and attached pulley and the necessary bushings, washers, and mounting screws. A hardware kit is available which contains: screws, washers, nuts, bushings, standoffs, snap rings, springs, etc.

06/01