EAW CB2591x technical specifications Components & Construction, Descriptive Data, Nominal Data

Technical Specifications CB2591x CINEMA SERIES

COMPONENTS & CONSTRUCTION

The CB2591x is a high output, passive, two-way, full range loud- speaker system intended for use in behind screen cinema applica- tions. It features dual 15-in low frequency transducers mounted in a compact, vented enclosure and a 2-in exit titanium diaphragm compression driver mounted to a large format 90° x 40° constant directivity horn.

The CB2591x requires no external active electronic crossover. The HF and LF sections are integrated via an internal passive crossover/ filter network. EAW's complex, computer-designed passive filter networks are tightly aligned to the loudspeakers they control and go beyond merely diving the signal, performing critical equalization functions.

The low frequency enclosure is constructed of 3/4-in thick Medium Density Fiberboard (MDF) with the exception of the baffle which is 15mm void-free, cross-grain-laminated Baltic birch plywood. Exten- sive internal bracing is employed to minimize panel resonances resulting from the large acoustical energies generated within the enclosures.

DESCRIPTIVE DATA

LF Subsystem & Loading	2x 15 vented
HF Subsystem & Loading	1x 2" compression driver on 90x40 horn
Number of Audio Bands	2-way
Powering Mode	Passive, Full Range
Recommended High-Pass
Frequency (24 dB/Octave)	30 Hz
Cabinet Type (shape)	Rectangular LF cab with externally
	mounted HF horn
Enclosure Materials	3/4" MDF with 15mm birch plywood
	baffle
Finish	Textured Black
Connectors	2-terminal barrier strip
NOMINAL DATA
Frequency Response (1 Watt @ 1m)
±3 dB	42 Hz - 18 kHz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Full Range	100
Impedance (Ohms)
Full Range	4
Power Handling, AES Standard (Watts)
Full Range	500

The high frequency horn is constructed from a specially dampened fiberglass which is non-resonant, lightweight and non-reflective.

The LF section includes a two-terminal barrier strip that accomodates bare wire, tinned leads or spade lugs. The input panel is located on the side of the LF enclosure for convenient access in cramped installation areas. A jumper cable is provided to extend the signal chain to the HF component.

The adjustable mounting bracket attaching the HF horn to the LF enclosure can be positioned at one of three mounting points for optimum HF horn placement. It allows the HF horn to be aimed independently of the LF section in both the horizontal and vertical planes and can be locked once it is positioned.

Calculated Maximum Output (dB SPL @ 1m)

Full Range Peak	133.0
Full Range Long Term	127.0

Nominal Coverage Angle/-6 dB points (degrees)

Horizontal		90
Vertical	40
Recommended Complementary Systems
Sub		SB184C, SB185C, SB284C
Dimensions		Inches	Centimeters
Height		77.75	197.5
Width		29.00	73.7
Depth	34.19		86.8
Weights		Pounds	Kilograms
Net Weight		182	82.6
Shipping Weight	195		88.5

One Main Street, Whitinsville, MA 01588 • (508) 234-6158 • FAX (508) 234-8251 • Email info@eaw.com • Web http://www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice. • CB2591x PUB#888121 Rev(A)/6/1/99 • Printed In USA