EAW AS90e Dimensional Drawing, Specifications, Weights Pounds Kilograms Net Weight 169 76.0

Page 2

DIMENSIONAL DRAWING

INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (PI ANGLE).

INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (NUT PLATE).

SYMBOL INDICATES CENTER OF BALANCE

24.63

36.00

GRILLE PARTIALLY SHOWN

 

FRONT

 

(1.50)

 

4.00

 

CL

 

 

33.00

 

18.88

 

 

ACCESS

 

 

PANELS

 

CL

 

 

 

 

5.00

INPUT

 

 

 

BACK

 

 

(12.29)

 

 

10.09

 

 

CL

 

 

A

 

 

 

23.00

 

 

16.00

 

11.00

 

 

 

4.00

A

18.67

 

 

30°

 

133 (0)

TOP/BOTTOM

 

5/10/01

 

 

 

 

16.56

4.63

 

 

CL

 

 

32.10

509133 (0)

SIDE VIEW (VIEW A-A)

 

5/10/01

DIMENSIONS APPLY TO BOTH SIDES

 

 

Manufacturing tolerances are +/- 0.13 and +/- 1°

 

 

 

 

 

Weights

 

pounds

kilograms

 

Net Weight

169

76.0

 

Shipping Weight

184

83.7

SPECIFICATIONS AS690e

A & E SPECIFICATIONS

The bi-amplified or tri-amplified 3-way full range loudspeaker system shall incorporate 2x 12-in LF vented transducers, a horn-loaded 10-in MF cone with Radial Phase Plug™ and a 1.4-in exit/2.5-in voice coil HF neodymium compression driver.

The LF drivers shall be mounted in slanted baffles and sepa- rated vertically. The MF driver shall be loaded into a midrange horn constructed of 1/8-in birch plywood backed with high density polyurethane foam. The HF driver shall be loaded on a constant directivity horn with a nominal coverage pattern of 90° (h) x 45° (v). An internal passive filter network shall provide fourth order acoustical crossover and system equal- ization between the MF and HF subsystems.

System frequency response shall vary no more than ±3 dB from 67 Hz to 15 kHz measured on axis. The mid/high section shall produce a Sound Pressure Level (SPL) of 107 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 139 dB SPL on axis at 1 meter. The low frequency section shall produce a Sound Pressure Level (SPL) of 102 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 137 dB SPL on axis at 1 meter. The mid fre- quency section shall produce a Sound Pressure Level (SPL) of 109 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 141 dB SPL on axis at 1 meter. The high frequency section shall produce a Sound Pressure Level (SPL) of 109 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of pro- ducing a peak output of 136 dB SPL on axis at 1 meter. The mid/high section shall handle 450 Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms. The low frequency section shall handle 800 Watts of amplifi- er power (continuous) and shall have a nominal impedance of 4 Ohms. The mid frequency section shall handle 400 Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms. The high frequency section shall han- dle 125 Watts of amplifier power (continuous) and shall have a nominal impedance of 8 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of multi-ply, void-free, cross-grain-lami- nated, exterior grade, Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resist- ant textured black paint. Input connectors shall be 2x 6- Contact terminal barrier strips, jumpers used for powering configuration. Eighteen (18) 3/8"-16 threaded mounting/sus- pension points (4 each on top, bottom and sides, 2 on back) shall be provided. The front of the loudspeaker shall be cov- ered with a powder coated perforated steel grille.

The bi-amplified or tri-amplified 3-way full range loudspeaker shall be the EAW model AS690e.

One

Main Street, Whitinsville, MA 01588

508 234 6158

Toll Free 800 992 5013

FAX 508 234 8251

info@eaw.com

www. eaw. com

EAW

products are continually improved. All specifications are therefore subject to change without notice.

AS690e/2 pp

October 2001

Printed in USA

Image 2
Contents Performance DescriptionApplication PhysicalWeights Pounds Kilograms Net Weight 169 76.0 Dimensional DrawingSpecifications 184 83.7

AS90e specifications

The EAW AS90E, widely recognized as a modern self-propelled artillery system, represents the cutting-edge in mobile firepower for contemporary military forces. Primarily designed for mechanized units, the AS90E is a refurbishment and upgrade of the original AS90, which has been in service since the late 1990s. Its enhancements aim to improve lethal efficiency, operational flexibility, and crew survivability.

One of the standout features of the AS90E is its powerful 155mm L/39 artillery gun, which can fire a range of munitions, including conventional high-explosive rounds, precision-guided projectiles, and infrared-guided shells. This versatility allows the AS90E to engage diverse targets effectively, from enemy personnel to fortified structures. The ability to fire at a maximum range of approximately 24 kilometers with standard rounds and up to 40 kilometers using extended-range munitions enables the AS90E to provide fire support from a safe distance.

Equipped with an advanced digital fire control system, the AS90E boasts rapid target acquisition and engagement capabilities. The system integrates sophisticated navigation, artillery computation, and communication technologies, allowing for quick response times and highly accurate fire. The fully automated loading system reduces the crew workload, ensuring that the artillery can deliver multiple rounds in rapid succession, significantly enhancing its operational tempo.

Mobility is another critical aspect of the AS90E. Built on a tracked chassis, the vehicle features a powerful engine that allows it to traverse various terrains, including difficult and off-road conditions. This mobility is essential for positioning the artillery in forward areas while maintaining a rapid withdrawal capability after fire missions, minimizing the risk of counter-battery fire.

Crew safety and survivability are paramount in the design of the AS90E. The chassis features armor protection against small arms fire and shrapnel, while an additional option for blast-resistant seating and other enhancements further improves crew safety. The onboard systems are designed to minimize the risk of detection, including options for silent watch capabilities that allow the system to operate in a low-noise mode.

With its combination of firepower, accuracy, mobility, and safety features, the EAW AS90E stands as a vital asset in modern artillery capabilities, reflecting the evolving demands of warfare in the 21st century. Whether in conventional conflicts or peacekeeping missions, the AS90E continues to adapt to meet the needs of armed forces worldwide.