![](/images/new-backgrounds/1184702/18470227x1.webp)
Press the right top menu “” on the screen and press “save” when complete this setting, see the figure as below:
Press back when complete saving, press the WIDI network name, For example, double press “KW”, then it will to enter into a interface to ask you input the code. Then input the right code, press “finish”. Then the system will connect and distribute IP address automatically, it will show “connected” once the system is completed connection. You can see the network connecting status accordingly when you press the network name, see the figure as below:
Connection information
2.Manual setup IP address:
Whether Using manual setup IP address or not, it depends on the WIFI Router’s setting, if distributing the network name by this way, just press the top right corner of the screen “” to enter into “advanced” setting and select the “Use static IP” ,then set the IP address as it from the Router. See the figure as below,
14