Clevo M665SE manual Removing the Keyboard, Keyboard Removal

2.Disassembly

Disassembly

Figure 12

Keyboard Removal

a. Press the three latches to release the keyboard. b. Lift the keyboard up and disconnect the cable

from the locking collar. c. Remove the keyboard.



Re-Inserting the Key-

board

When re-inserting the keyboard firstly align the five keyboard tabs at the bottom of the keyboard with the slots in the case.



6. Keyboard

Removing the Keyboard

1.Turn off the computer, and remove the battery (page 2 - 5).

2.Press the three keyboard latches at the top of the keyboard to elevate the keyboard from its normal position (you may need to use a small screwdriver to do this).

3.Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable (Figure b).

4.Disconnect the keyboard ribbon cable 4 from the locking collar socket 5 .

5.Carefully lift up the keyboard 6 (Figure c) off the computer.

a.	2	b.
1		3

4

5

c.

6

6

Keyboard Tabs

2 - 16 Removing the Keyboard