Compaq N150 Series manual Hardware Guide

Page 62

External Device Connections

Modem models will need an RJ-11 cable. To connect the cable:

1.Plug one end of the RJ-11 cable into the RJ-11 jack on the computer. If the RJ-11 cable contains a noise suppression circuit, which prevents interference with TV and radio reception, orient the cable so that the noise suppression circuitry is closest to the computer.

2.Plug the opposite end of the cable into a standard telephone wall jack. Or, if applicable, plug the opposite end of the cable into the phone plug adapter, which then plugs into the wall jack. Some countries may require an adapter to connect the modem to the telephone wall jack.

The NIC models will need an RJ-45 cable. To connect the cable:

1.Plug one end of the RJ-45 cable into the RJ-45 jack on the computer.

2.Connect the other end of the cable into the network jack.

To find additional modem and NIC information, refer to the following documents:

Modem and Networking guide on the Notebook Products Reference Library CD for configuring the modem and installing software.

Modem Commands on the Notebook Products Reference Library CD for AT Commands, including dial modifiers and instructions.

Hardware Guide

7–7

Image 62
Contents Hardware Guide Hardware Guide First Edition May Part Number Contents Battery Packs Computer Upgrades and Add-Ons Index Hardware and Software Setup Setting Up the HardwareInstalling the battery pack Connecting the AC Adapter and power cord Opening the computer Turn on the computer by pressing the power button Setting Up the Software Completing Initial SetupAfter Software Setup Installing Optional ApplicationsHardware and Software Setup Look at the Computer Front ComponentsFront Components Component FunctionTop Components Top ComponentsTop Components Top Component Lights Top Component Lights Right Side Component Right Side ComponentLeft Side Components Left Side ComponentsComponentFunction Rear Panel Components Rear Panel ComponentsLook at the Computer Bottom Components Bottom ComponentsBottom Components Additional Standard Components Additional Standard ComponentsAdditional Standard Components Using the TouchPad Keyboard and Pointing DevicesUsing Hotkeys Hotkey Quick ReferenceSwitch Display and Image Fn+F3 HotkeysInitiating Standby Fn+F4 Using the Embedded Numeric Keypad Enabling the Numeric KeypadConverting the Numeric Keypad Keys to Standard Keys Using the Easy Access ButtonsDisabling the Numeric Keypad Identifying the Easy Access buttons Battery Packs Charging Battery PacksUsing a New Battery Pack Replacing the Primary Battery PackRemoving the battery pack Installing or Removing the Optional Media Bay Battery Pack Removing a Media Bay device Using the Battery Quick Charge Check Calibrating the BatteryHardware Guide Storing a Battery Pack Recycling a Used Battery PackDrives Caring for DrivesRemoving and Inserting the Hard Drive Inserting or Removing a Media Bay Drive Connecting the Optional External Diskette Drive Removing and Inserting Storage Media Inserting and Removing a DisketteInserting a Disc into the CD or DVD Drive Viewing the CD Removing a Disc from the CD or DVD DriveChanging the Startup Sequence Using Audio Features AudioConnecting to the Stereo Line-Out/Headphone Jack Audio ComponentsAdjusting Volume Connecting to the Stereo Line-In JackConnecting an External Keyboard or Pointing Device External Device ConnectionsConnecting an External Monitor Connecting a Serial PrinterConnecting a Parallel Printer Connecting Infrared EquipmentInfrared Connection Guidelines Infrared Configuration Guidelines Enabling the Infrared PortConnecting USB Equipment Connecting a Modem or NIC CableHardware Guide Using the Security Slot Computer Upgrades and Add-Ons Before Removing or Installing ComponentsUpgrading Memory Removing and Inserting a Memory Expansion Board Removing a memory expansion board Replace the memory cover and reinstall the screws Adding and Using PC Cards Configuring a PC CardInserting a PC Card Removing a PC Card Conserving EnergyAdding Wireless Devices Installing Additional Device DriversUpgrading the Hard Drive Battery PacksMedia Bay Devices Agency Series Numbers SpecificationsRegulatory Agency Series Numbers Computer Dimensions Operating EnvironmentRated Input Power Port and COM Port SettingsCommunications Specifications CommunicationsTemperatures Power Requirements Computer Utilities Using the PhoenixBIOS Setup UtilityPower Management Setting Standby Enabling Power SavingsTimeout Settings Hibernation Security10-4 Index Index-2 Products Reference Library CD-ROM2-15 Modem cable internal modem models only 2-14,2-15 Safety & Comfort Guide. See Index-6 Index-7