QuickSpecs
HP Compaq nx7300 Notebook PC
Technical Specifications
V.21
Bell 212A
Bell 103J
Fax Mode Capabilities
|
| T.30, T.4 (Group 3) |
|
| V.17 |
|
| V.29 |
|
| V.27ter |
|
| V.21 Channel 2 |
| Command Set | V.250 (Partial) |
|
| |
|
| Identification: +GMI, +GMM, +GMR |
|
| Port control: +IPR, +ICF, +IFC, +ILRR |
|
| Modulation: +MS, +MR, +MA |
|
| Error control: +ES, +ER, +EB, +ESR, +ETBM |
|
| Data compression: +DS, +DR |
|
| V.251 |
|
|
|
Broadcom 4311BG | Wireless LAN | IEEE 802.11b |
802.11b/g WiFi Adapter Standards | IEEE 802.11g | |
| Interoperability | |
|
| Cisco Compatible Extensions Program compliant |
|
| (details at www.hp.com/go/notebooks/WLAN) |
| Frequency Band | 2.4 GHz |
| Data Rates | 802.11b: 1, 2, 5.5, 11 Mbps |
|
| 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| Modulation | Direct Sequence Spread Spectrum |
|
| DBPSK, DQPSK, CCK, OFDM |
| Security1 | Supports 64- and |
|
| AES, 802.1x authentication types |
|
| |
|
| Support for Cisco Security Features (proven compatibility with Cisco |
|
| Aironet infrastructure products through the Cisco Compatible |
|
| Extensions Program Version 4). |
|
| Multinational support with frequency bands and channels compliant to |
|
| local regulations. |
| Media Access Protocol CSMA/CA (Collision Avoidance) with ACK | |
| Network Architecture | |
| Models | Infrastructure (Access Point Required) |
| Roaming | IEEE 802.11 compliant roaming between access points |
| Output Power (for | 17.5 dBm |
| CKK)2 |
|
| Output Power (for | 15 dBm |
| OFDM; power varies by |
|
| data rate)2 |
|
| Power Consumption | Transmit: 2.0 W (max) |
|
| Receive: 1.5 W (max) |
|
| Idle mode3: 390 mW (nominal) |
|
| Sleep mode: 20 mW (max) |
| Power Management | ACPI compliant power management |
|
| 802.11 compliant power saving mode |
| Receiver Sensitivity4 | 54 Mbps: |
DA - 12614 Worldwide QuickSpecs — Version 3 — 1.30.2007 | Page 23 |