EAW CLA37 Fly bracket and wall bracket mounting instructions, Mounting the Wall Bracket

Page 6

Fly bracket and wall bracket mounting instructions

Follow these instructions to mount the fly bracket to the enclosure, hang the assembly at various forward tilt angles, and attach the enclosure/fly bracket assembly to the wall bracket. Make your speaker-wire connections before proceeding.

Warning: Installation should only be done by an experienced technician. Improper installation may result in damage to the equipment, injury or death.

1.Mounting the Fly Bracket to the Enclosure:

a.Remove the screws from the top and bottom of the enclosure.

b.Onto each of these two screws, place a lock washer and a flat washer.

c.Insert a screw (with washers) through the top hole of the fly bracket. Thread into the enclosure’s top mounting hole.

d.Insert a screw (with washers) through the bottom hole of the fly bracket. Thread into the enclosure’s bottom mounting hole.

e.Angle the enclosure so it is at a right angle to the fly bracket and tighten the two mounting screws.

2.Hanging the Enclosure/Fly Bracket Assembly:

a.Support the enclosure/fly bracket

assembly from each side of the fly bracket using one set of the paired holes along its top and back.

b.The hardware for hanging the enclosure/ fly bracket assembly is not supplied. It is recommended that you consult a rigging professional to determine the proper hardware to hang the enclosure/fly bracket assembly.

3.Mounting the Wall Bracket:

SCREW 1/4 INCH-20 X 1.25 INCH LONG

HEX HEAD

2 PLACES

REUSE EXISTING

SCREW FROM TOP

FLY

BRACKET

 

FLAT WASHER

 

1/4 INCH

 

2 PLACES

REUSE

 

EXISTING

LOCK WASHER

SCREW FROM

1/4 INCH

BOTTOM

2 PLACES

FLYING ANGLES

9° 12° 16°

(CABINET SHOWN

 

 

 

 

 

 

VERTICAL AT 0°)

 

 

 

 

 

 

 

20°

22°

27°

30°

31°

32°

36°

40°

a.Mount the wall bracket to the desired surface (see picture on next page). The hardware for securing the wall bracket to a mounting surface is not supplied. It is recommended that you consult a rigging professional to determine the proper hardware for mounting the bracket. Make sure the two holes nearest one end of the wall bracket are toward the floor.

6 – CLA37

Image 6
Contents CLA37 Safety Instructions Table of Contents Introduction Installation Mounting PrecautionsUnpacking and Inspection Fly bracket and wall bracket mounting instructions Mounting the Wall BracketPlace a flat washer and a lock nut. Do not tighten just yet Bracket Dimensions ConnectionsPrecautions Loudspeaker CablesOperation Signal ProcessingChoosing a Power Amplifier Operating TipsSpecifications CLA37 DimensionsPerformance Graphs DisclaimerDistorted Sound TroubleshootingNo Sound or Low Output Partial Sound frequency band missingMaintenance ServiceWarranty EAW Commercial Technical SupportEAW Commercial One Main Street Whitinsville, MA 01588 USA

CLA37 specifications

The EAW CLA37 is a highly regarded compact line array system designed for a variety of live sound applications, from small to medium-sized events. Engineered by Eastern Acoustic Works (EAW), the CLA37 is known for its impressive audio performance, versatility, and user-friendly design.

One of the standout features of the CLA37 is its arrayable design, which enables seamless integration with other units to create a powerful, coherent sound field. The system can deliver consistent coverage and high-quality output across various listening environments, making it ideal for both indoor and outdoor applications. EAW’s innovative approach to array design ensures that the CLA37 can be configured to meet the specific requirements of each event, whether it’s a corporate event, concert, or public address.

The CLA37 utilizes advanced transducer technology, featuring dual 7-inch woofers and a 1.4-inch compression driver. This combination allows for a balanced sound reproduction with clear highs and robust lows. The frequency response of the system spans from 60 Hz to 20 kHz, providing a wide range that caters to various audio content types, including music and spoken word.

Another hallmark of the CLA37 is its remarkable power handling capabilities. The system can handle up to 600 watts of program power, making it suitable for high-energy performances and larger audiences. Furthermore, it offers a variety of rigging and mounting options, allowing for easy setup, transport, and storage. The integrated rigging hardware simplifies the process of linking multiple units together, ensuring stability and safety during operation.

EAW has also placed an emphasis on the aesthetics of the CLA37, ensuring that it can blend seamlessly into different environments. Its sleek design not only contributes to its portability but also allows for unobtrusive placement at events, enhancing the overall visual appeal.

Connectivity is another strong point of the CLA37, with multiple input options that facilitate integration into existing sound systems. The system is designed to work efficiently with EAW's proprietary software, allowing sound engineers to easily configure and optimize the performance based on the specifics of the venue.

Overall, the EAW CLA37 stands out as an exceptional choice for sound professionals seeking a reliable and high-quality compact line array system. Its combination of innovative technologies, robust build quality, and user-focused features make it a standout performer in a competitive landscape.