Maintenance & Service Guide
Presario 1800 Series
Models: 1825 and 1800T
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Removal & Replacement Procedures
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
TouchPad
Keyboard
Status Panel
Internet
Button Board
Heatspreader
Network
Interface Card
Modem
Hard Drive
DisqPlay
Module
Processor
DVD or
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly 
Diskette Drive 
Battery
Charger Board
Speaker
Assembly
System Board 
Memory
Module
Removing
the Display
Panel
Assembly
Illustrations may show parts removed that are not part of this procedure.
NOTE: It is necessary to remove only the parts listed in the written procedures.
To remove the display panel assembly, complete the following steps:
1.Prepare the computer for disassembly.
2.Remove the status panel assembly.
3.Remove screw securing the display flex cable bracket and disconnect the display flex cable and backlight cable from the Internet Button Board.
Next Step