Introduction, Unpacking, Features, Care

Introduction

Dear Valued Customer,

Welcome to the eclectic world of Earthquake High Fidelity sound systems; you are about to experience the MiniMe subwoofer. This system is designed to dramatically enhance your enjoyment of music and films at home, by adding power and impact to low frequency sound effects, without taking up your entire living space.

Earthquake Sound Corporation is located in the heart of the Silicon Valley. It specializes in manufacturing high end Home and Mobile audio products ranging from the smallest driver to the loudest subwoofer systems. In its dedication to excellence, Earthquake has maintained extensive programs in research and development to provide you with the highest quality audio products made.

This owners manual is designed to better acquaint you with the MiniMe subwoofer system, and to guide you through the phases of system design and application. It is imperative that you read this manual in its entirety. EARTHQUAKE technicians and staff are looking forward to answer any questions you might have, please call (1-800-576-7944).

Unpacking

Your Earthquake subwoofer should reach you in perfect condition. If you do notice any shipping damage, please contact your Earthquake dealer immediately.

Gently lift out the unit and remove all the packing material. It is important. It is important to save all the packing materials and the box in case your subwoofer ever needs to be moved or shipped for repair.

Make sure that you keep your sales receipt. It s the only way to establish the duration of you Limited Warranty and it may be useful for insurance purposes.

Please take a moment to fill out and mail the Earthquake Warranty Registration card. Also read the serial number located on the control panel and record it here:

Serial Number:

Purchased From:

Date:

Features

•Built in 320-Watt, high efficiency amplifier

•Extremely low distortion

•Long throw, premium quality drivers

•Convenient compact size

•Automatic signal-sensing turn-on and stand-by mode

•Volume control

•Operation status LEDs

•50Hz - 160Hz Freq. adjustment

•0 - 180 Phase Shift adjustment

•High Level inputs

•Bypassed High Level outputs

Care

To maintain the speaker cabinet's finish, first unplug the power cord and then use a soft, slightly dampened cloth to clean the surfaces and finish off with a dry cloth.

To keep the large rubber surrounds soft and supple for 20-years or more, treat them with mink oil, available ta most shoe repair stores. Rub a generous amount into the surrounds with a soft cloth about once a year (more often if you line in a dry climate).

Earthquake • MiniMe User Manual		4