| Customizing Your Notebook Computer | n N 38 |
|
|
|
|
|
| Selecting the Display Mode |
|
|
About the Software on your Notebook Computer
✍
If you select CRT/Projector and turn off the LCD, you can use the Refresh Rate slider to change the display's horizontal frequency. This setting can be made only for CRT display. If you select Independent Display Timing, you can change both the resolution and the refresh rate.(see page ).
Using a CRT or Projector
When you select CRT/Projector as the display mode, you can make additional settings, described as follows:
1 After selecting CRT/Projector as the type of external display (step 6 in "Selecting the display mode"), click Advanced Settings.
2 Click the External Display Options tab.
3 Select the following options:
External Display Device:
CRT | Connects with the external computer |
| display. |
|
|
Projector | Connects with the projector. |
|
|
Monitor Settings: |
|
✍
You cannot select Independent Display Timing when the display is set to True Color (24 bit).
Independent Display Timing
Click to place a checkmark when you want to set the resolution and refresh rate differently from the computer's LCD. To change the resolution and refresh rate, see the notes to step 6 in "Selecting the display mode".